3 ms·
Are you sure? Gold is one of the most soft/malleable metals used to plate connectors? (I know it's one the best best conductors). And we all know, there's no d
by Alupis 12y ago
Are you sure? Gold is one of the most soft/malleable metals used to plate connectors? (I know it's one the best best conductors).
And we all know, there's no difference between the $150 hdmi cable and the $5 hdmi cable except cosmetics and perhaps some better shielding. They're all digital connections, so the signal/bits are either there or are not.
- nathanm412 12y agoIt's also extremely stable and won't corrode, rust, or tarnish over time.
- DanBC 12y agoI really hope the $150 cable has much better manufacturing and inspection. Obviously that doesn't mean they're worth that much, but still.
- Alupis 12y agoYou'd be surprised. The $150 hdmi cable is likely manufactured alongside the $5 cables in the same factory, then just sold to different brands (Monster vs. Store-brand). It's fairly common... Samsung makes almost all the parts of the Best Buy store-brand TV's... they're essentially a slightly lower-grade samsung tv with the store-brand slapped on and sold cheaper.
- kenrikm 12y agoAlso why the Dynex TVs usually get pretty good reviews. I used to work for a Grocery Distributor.. Most of the time store brands really are just the name brand repackaged.
- qwerta 12y agoI too often encounter cheap Ethernet cable which only works at 10Mbps because maker saved money on wires.
- jrockway 12y ago> They're all digital connections, so the signal/bits are either there or are not. Absolutely not true. There is quite a lot of engineering behind making an HDMI or Ethernet cable work: http://en.wikipedia.org/wiki/Transmission_line http://en.wikipedia.org/wiki/Transmission_line And, there are plenty of ways to mess it up and make a cable that only sort of works. TMDS, the signaling mechanism that HDMI uses, does not have error correction codes. It does do some error detection by using 10 bits to transmit each 8 bit message and declaring some of the binary representations "invalid", but if the cable does not work well, you will get visual artifacts. (I was surprised when I saw this; little specks of green among blacks while I was running an HDMI cable very close to its maximum bandwidth. One video card I tested refused to output anything, but another was happy to send a signal that was corrupted by the cable.) Further reading: http://en.wikipedia.org/wiki/Line_code http://en.wikipedia.org/wiki/Line_code http://en.wikipedia.org/wiki/Differential_signaling http://en.wikipedia.org/wiki/Differential_signaling
- Alupis 12y agoAgain, the bits are either there or they are not (corruption). I don't see your point, because it seems to back my earlier point.
- rayiner 12y ago"Digital" is a fiction made possible by the heroic efforts of hardware designers. In the real world, every interconnect is an analog system. In "digital" interconnects like HDMI that don't have error correction, you can get artifacts before you lose the picture entirely.
- jrockway 12y agoBits are there, but the bits that come out of the video card may not be the bits that the TV sees. Like another comment says, it's all analog once you're outside of the computer, and the conversion between the two is not perfect. What digital signaling does is fix some common failure modes of analog. The signal is balanced, so it's more immune to picking up and emitting noise. The electrical signal only has two defined states, so if you degrade the signal in some way (attenuation, noise), you'll probably be able to pick the right state. But, you don't get infinite ability to do that, only more. Eventually, the two states become indistinguishable, and then you can't tell which bit was transmitted to you. (But you can't tell that you can't tell, so you start picking bits at random.) If we take this to the logical extreme, your argument implies that you can build an infinitely long cable with an infinitely tiny amount of material.