4 ms·
> We have successfully commanded both of ISEE-3's data multiplexers into engineering telemetry mode. The current bitrate is 512 bits/sec. BITS not even BYTES,
by ForHackernews 12y ago
> We have successfully commanded both of ISEE-3's data multiplexers into engineering telemetry mode. The current bitrate is 512 bits/sec.
BITS not even BYTES, let alone kilobytes.
- w-ll 12y agoData transmission is always measured in bits.
- jonknee 12y agoYes, the OP was just commenting at how amazingly slow the connection is. These days we don't think about individual bits per second.
- drzaiusapelord 12y agoStill faster than a 300bps modem that was sold years later and that only had to run over a short run of terrestrial copper.
- geon 12y agoDidn't they usually have 2 air gaps with acoustic transmission in the loop, though?
- drzaiusapelord 12y agoby 1981 or so the acoustic coupler was antiquated. The modem had a controller that handled telephony stuff like dialing, hanging up, etc and a you'd just plug your POTS rj-11 straight into it.
- mikeash 12y agoMy very first modem was a 300bps box that plugged straight into the phone line. I remember being frustrated that I could read faster than the text came in, even though I was only 8 years old or so at the time. When we got a 2400bps modem, it was fantastic that stuff came in faster than I could read it. Bringing the conversation back to space, one of the first things we did with the modem was dial into some public NASA BBS (long distance!) and download pictures from Voyager.
- noselasd 12y agohttp://eyes.nasa.gov/dsn/dsn.html http://eyes.nasa.gov/dsn/dsn.html , you'll catch the DSN every now and then downlinking the voyager spacecrafts at about 160 bits/sec.
- dm2 12y agoThat's an awesome page, thanks! I happen to see VGR1 pulling down data at "159.00 b/sec" right now.
- datenwolf 12y agoI don't really understand why this page reports the received power in kW? This will inevitable result all reported power levels be some 10^-p with p > 3. Also Watt is not a very useful unit here. You want something like dB(mW) which is much handier to work with. Good thing is, you just have to look at the exponent to get a rough dB(mW) figure: 10·log_10(m) - (p-6)·10, p being the exponent, m being the mantissa; for a quick estimate let m = 5, 10·log_10(5) =~= 7. So for the p = -23 this gives about -167dB(mW), which is accurate enough.
- tedd4u 12y agoOkay, that is going into rotation on one of the "inforads" ... Super super cool.