4 ms·
32 core virtualization cluster for £1300
- valarauca1 13y agoHonest question, why are the computers connected with Ethernet as apposed to PCIe wouldn't that allow faster communication between cores?
- JoeAltmaier 13y agoSerial busses are fault-tolerant without cross-traffic disruption. One controller on a shared bus going bad ruins the party for everybody.
- valarauca1 13y agoOn a serial bus no. An RS-485/428 bus and individual controller can die and the bus functionality is not destroyed. To achieve the behavior you described devices would have to bridge the connections, not be wired in parallel. This assumes PCIe can handle that connection style, which I understand the standard little, so I could be completely off base.
- rwmj 13y agoTo be honest I didn't know that connecting them with PCIe was a possibility. Now I see it is, I may try that, so thanks :-)
- valarauca1 13y agowhen I say 'possibility', I should put more quotes around it. I know BlueGene (I one of the 00's top 10 super computers) did the interconnections of its processors with PCIe
- dman 13y agoDoes anyone know if there are any ATX power supplies that can power more than a single motherboard?
- rwmj 13y agoPower is the major problem that stops me scaling this up to the ceiling, so I'd like to know the answer to this too. Apparently there are PSU splitters (used by bitcoin mining rigs) but most people seem to have made their own.
- dman 13y agoBtw - have you taken a look at this - http://www.asrock.com/mb/AMD/AM1H-ITX/ http://www.asrock.com/mb/AMD/AM1H-ITX/ . Its not as good as having a single power supply for multiple boards, but it has a dc power supply (notebook style) that should take a lot less space / be a lot more silent than traditional power supplies.
- rwmj 13y agoThat motherboard looks good, but is rather expensive. The motherboards I'm using (see [0] for spec) plus the power supply is only a tiny bit more expensive than that. (And the central aim of this project is to get as many cores and as much RAM for as little money as possible) [0] http://rwmj.wordpress.com/2014/04/16/caseless-virtualization-cluster-part-2/#content http://rwmj.wordpress.com/2014/04/16/caseless-virtualization...
- DanBC 13y agoI love this. Threaded rods with a couple of nuts and crinkle washers might be cheaper and more adjustable than a lot of spacers. As for power - you'll want some kind of industrial supply that can cope with multiple motherboards. These will ne sold at places like FEC or RS or etc, rather than computer parts suppliers. And I freaking love "Ocha Ken".
- rwmj 13y agoYes threaded rods were suggested by a commenter on the blog[0]. By the time he had posted that comment I'd already invested in about 100 of those aluminium stand-offs, so I decided to go with that :-) [0] http://rwmj.wordpress.com/2014/04/13/caseless-virtualization-cluster-part-1/#comment-9476 http://rwmj.wordpress.com/2014/04/13/caseless-virtualization...