3 ms·
> You could simply connect the GPIO lines of one 'pi' with the neighbours! How fast you reckon a GPIO based bus would be? Especially if the rpis are required t
by zokier 13y ago
> You could simply connect the GPIO lines of one 'pi' with the neighbours!
How fast you reckon a GPIO based bus would be? Especially if the rpis are required to do something more than just shuffle data around.
- undersuit 13y agohttp://codeandlife.com/2012/07/03/benchmarking-raspberry-pi-gpio-speed/ http://codeandlife.com/2012/07/03/benchmarking-raspberry-pi-... I was wondering this too, but I never took the time to find out what this guys numbers could translate to in terms of actual throughput.
- fhars 13y agoThese measurements are irrelevant to the question at hand, as they toggle the pins in software. If you were using them in a communication setting, you would use pins that can do serial communication using DMA, consult the processor datasheet for details. It looks like adafruit is able to push pixel data at 80Mb/s (that's Mb, not MiB) over SPI to a display: https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/faq#faq-3 https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-...