4 ms·

I imagine you could do something like this. Off the top of my head this would pose a few issues. 1) While the magnetic force must go from one rail to the othe

I imagine you could do something like this. Off the top of my head this would pose a few issues. 1) While the magnetic force must go from one rail to the other, the amount of electric force is effected by how much of the body is doing the conducting(if my memory servers me). So while you could use wheels, you would still want the current to flow through the entire(or large portion) of the projectile housing(for lack of a better term). This leads to the second issue. 2) Melting. With these huge amperage's there is also huge heat levels. If you were to conduct this much current through a small point(as would be the case with a wheel) the heat generated would be even worse. Most likely causing the wheels/barrings to melt. Neither of which cant be accounted for, just issues that would have to be considered.

malandrew 13y ago
Many wheels, possibly in the form of many small ball bearings on a rail should work. Many small cylinders instead of spherical bearings would be better. Even better would be a highly conductive grease non-flammable grease.
- bradleyland 13y ago
  The bearing idea isn't a solution for a few reasons: 1) Rotating bearings still have internal friction, which will still generate tremendous heat at these velocities. 2) A lot of the heat being generated here is caused by the flow of electrical current, which isn't negated by bearings. In fact, it would probably be made worse, because any spherical contact patch is going to be tiny compared to a flat surface. The suggestion of using many small bearings would seem to alleviate this problem, but the smaller you make the bearing, the more fragile it becomes. At its heart, this is a materials science problem. You need a material that can conduct the electricity, withstand the heat, and not break down under high friction loads while doing both of these. Simply dropping in a bearing doesn't solve any of these problems The highly conductive, non-flammable grease is just another materials challenge. At the kinds of temperatures present in a rail gun, "non-flammable" becomes a very high bar for a lubricating fluid.

malandrew 13y ago

Many wheels, possibly in the form of many small ball bearings on a rail should work. Many small cylinders instead of spherical bearings would be better. Even better would be a highly conductive grease non-flammable grease.

bradleyland 13y ago
The bearing idea isn't a solution for a few reasons: 1) Rotating bearings still have internal friction, which will still generate tremendous heat at these velocities. 2) A lot of the heat being generated here is caused by the flow of electrical current, which isn't negated by bearings. In fact, it would probably be made worse, because any spherical contact patch is going to be tiny compared to a flat surface. The suggestion of using many small bearings would seem to alleviate this problem, but the smaller you make the bearing, the more fragile it becomes. At its heart, this is a materials science problem. You need a material that can conduct the electricity, withstand the heat, and not break down under high friction loads while doing both of these. Simply dropping in a bearing doesn't solve any of these problems The highly conductive, non-flammable grease is just another materials challenge. At the kinds of temperatures present in a rail gun, "non-flammable" becomes a very high bar for a lubricating fluid.