2 ms·
To the first question: yes, and after a bit more thought, I realize that this assembly must be designed to use a single lens, as the sensor arrays are close tog
by mannykannot 13y ago
To the first question: yes, and after a bit more thought, I realize that this assembly must be designed to use a single lens, as the sensor arrays are close together, which would make it difficult to have any other optical arrangement. The pictured assembly would form the back of the camera, where the rectangular CCD array (or film) goes in a conventional camera.
The picture shows that the red sensor is further from the green one than the blue is, simply because it is on a separate sub-assembly. If the infra-red image showed on the pictures, it would be as far from the red one as the green one is from the blue. Given the order of the arrays on the camera, the IR image of the plane would be ahead of the red image, meaning that the IR is the last of the four images taken.
Incidentally, the pictures show the aircraft are experiencing considerable wind drift, especially in the case of the top-left picture, where you can see the contrail. This indicates strong winds, and probably also a relatively low airspeed for the aircraft. The orientation of the waves suggests a head- or tail-wind, but to get that drift, it must be different at the airplane's altitude (which probably is not high if it is searching.)