3 ms·
Coming from a EE background, sounds like total bogosity relying on the customers not knowing anything about electronics. Magically dripping oil on a piece of e
by VLM 13y ago
Coming from a EE background, sounds like total bogosity relying on the customers not knowing anything about electronics. Magically dripping oil on a piece of electronics makes it use half the power, yeah get back to me on that.
I never knew that adding massive capacitance to high speed signalling lines made their drivers draw less current (super sarcastic here, its the other way around)
I've dunked my share of power resistors, precision resistors, and the occasional semiconductor in oils of various sorts and nothing too exciting happens. Some electrolytic caps are not very well sealed and leak oil in and (conductive) electrolyte out. Some component marking inks are oil soluble and some inks are semi-conductive, which can be a problem.
- mscman 13y agoIt's not that the components themselves draw half the power, it's that you don't need to provide as much power to cool them. There's a typical rule of thumb in datacenter planning that for every 1W of compute power, you need 1W to cool it. If you can cut the cooling power, you can cut almost 50% of your datacenter cost. Obviously you won't eliminate cooling cost entirely, and it's quite possible the overhead of replacing oil and extended maintenance times could offset these power savings.
- welterde 13y agoWhy not go for warm water cooling then (like SuperMUC[1] for example)? Should get you the same benefits as submerging it in oil without most of the drawbacks. [1] http://www.lrz.de/services/compute/supermuc/systemdescription/ http://www.lrz.de/services/compute/supermuc/systemdescriptio...
- VLM 13y agoWouldn't you save a lot more money improving the COP of the refrigeration system from 1 or so, to something a little better? Even the cheapest poorly installed window air conditioner can do 3 or 4, and central residential air can do much better.