4 ms·
I understand what you are saying about things like the Moon, Pluto, etc. If a bury a thermometer on the moon, and dig it up 5 minutes later, it will be very col
by IgorPartola 13y ago
I understand what you are saying about things like the Moon, Pluto, etc. If a bury a thermometer on the moon, and dig it up 5 minutes later, it will be very cold.
But we are talking about a space walk here. Let's phrase the question this way: if I have a 1 kg mass of plastic and metal in some proportion and I throw it out of the airlock with the initial temperature of 293 K, what will its temperature be 30 minutes later if it was (a) in the shadow and (b) in the sunlight? This is a different case than being in contact with a hot or cold satellite or planet. It's a rate problem. If we assume a near-perfect vacuum, the only heat going in and out is via radiation. So the question is, how fast does a hunk of metal/plastic radiate heat at 293 K.
Now, the radiation heat transfer out of a black body will be: q = σ T^4 A, where q is the Watts of heat transferred, σ is the Boltzman constant, T is the temperature in Kelvin, and A is the surface area. Roughly: 5.6703e-8 x 293 x 0.1 for a GoPro camera. That's 1.66e-6 Watts, or 1.66 microwatts. That's a pretty damn low transfer rate: we are talking about roughly 3 mJ of energy lost over 30 minutes.
Now, the delta T here is equal to Q/(mC), where Q is our 0.003 Joules, m is the mass, 0.135 kilograms, and C is the specific heat. The specific heat is tricky but let's assume this thing is made out of copper: 390 J/(K kg). That gives us a delta T of, drum roll please, 5.7e-5 degrees. So assuming we are in the shade and are not touching cold objects, the GoPro will come back at the exact temperature it left after a 30 minute space walk.
We can of course figure out what it will be in the sun, where I expect it'll heat up quite a bit, which is probably the more dangerous thing for a piece of equipment. The equations are nearly the same.
- lutusp 13y ago> Let's phrase the question this way: if I have a 1 kg mass of plastic and metal in some proportion and I throw it out of the airlock with the initial temperature of 293 K, what will its temperature be 30 minutes later if it was (a) in the shadow and (b) in the sunlight? To answer, I have to say first that radiation is a much more efficient way to transfer heat energy than convection, and in some contexts it rivals conduction. If it's in shadow, exposed to space and not the sun, the object in your thought experiment will radiate most of its heat energy rather quickly, and will ultimately fall to a temperature near the CMB, i.e. 2.7 Kelvins. > Now, the radiation heat transfer out of a black body will be: q = σ T^4 A, where q is the Watts of heat transferred, σ is the Boltzman constant, T is the temperature in Kelvin, and A is the surface area. Roughly: 5.6703e-8 x 293 x 0.1 for a GoPro camera. That's 1.66e-6 Watts. In your calculation, you failed to take the fourth power of the temperature. http://en.wikipedia.org/wiki/Black-body_radiation#Stefan.E2.80.93Boltzmann_law http://en.wikipedia.org/wiki/Black-body_radiation#Stefan.E2.... j = σ T^4 (j = radiated power watts) = 5.67 * 10^−8 * 295^4 Watts from a "unit square", presumably a square meter, or about 430 watts. Remember that three-dimensional objects lose their heat energy more quickly as they become smaller in size (because their dimensions decrease proportional to the square of their dimensions, but their volume declines as the cube). This means the GoPro camera, initially at room temperature, exposed to space would radiate away its heat energy very quickly. The linked article suggests that a person (at body temperature and in a normal earthly environment) radiates away a net power of about 100 watts. Remember about this figure that is is a net (radiation minus absorption) for a person of about 2 square meters surface area at room temperature. If we calculate the example of a person exposed to space (in shadow) directly without any heat inflow, the radiated power would be about 860 watts. If a person were shaped like a GoPro camera (with the same density) and we scaled it down proportionally, the rate of heat loss would increase (even though the power would decrease) for reasons given above. That consumer camera would not be long for this world -- in fact, it would probably expire faster than the hapless human in the above example. > So assuming we are in the shade and are not touching cold objects, the GoPro will come back at the exact temperature it left after a 30 minute space walk. Do take the fourth power of temperature. See how that turns out. :)
- IgorPartola 13y agoHa! You are totally right. Yes, at 430 Watts we are talking about substantial heat transfer. Without getting into the calculus, if we approximate that the heat transfer will stay constant for a short period of time, then in the first second, we will lose roughly 8.2 degrees. Yup, you are correct, the thing will be damn cold.
- lutusp 13y agoBelieve me, I'm not gloating. I can't count the number of times I've drawn a bogus conclusion after missing a critical calculation step.
- mrfusion 13y agoNice write up. On a similar note I've always wondered why they say the planet mercury is cold at night. Wouldn't it take weeks for the surface to cool down since its in a vacuum?
- lutusp 13y ago> Wouldn't it take weeks for the surface to cool down since its in a vacuum? The fact that Mercury has no atmosphere doesn't decrease the rate of heat radiation, it increases it (compared to a planet with an atmosphere). Your question appears to relate to the efficiency of vacuum storage bottles, but that's a different case with a different logic. For a vacuum thermos, the presence of the vacuum represents a less efficient heat conduction medium than air (or foam), which uses conduction and convection to transfer energy. The difference in temperature between the contents and the environment also plays a part. But for a planet, no atmosphere means radiation operates at maximum efficiency, and radiation is a very efficient energy transfer method, especially when there's a large temperature difference between the object and space. Even on earth (with an atmosphere), radiation directly to space turns out to be more efficient than atmospheric conduction and convection, such that objects on the surface can fall well below air temperature if the sky is clear of clouds. It's not uncommon for earth's surface to drop below air temperature overnight, which can produce such effects as "radiation fog" near the ground, caused by condensation of water vapor in the air cooled by the surface. It's common to believe that on earth, air conduction/convection is the majority heat transfer method and radiation is less effective, but in fact it's the other way around.
- mrfusion 13y agoThanks. So I'm still not clear why a vacuum in a thermos is superior then?
- lutusp 13y ago> So I'm still not clear why a vacuum in a thermos is superior then? It's not just the vacuum, but a combination of a vacuum plus a reflective coating to deal with the effectiveness of radiation as a heat transmission method. In this way a vacuum thermos addresses all three heat conduction methods -- conduction, convection and radiation. More here: http://wiki.answers.com/Q/How_does_a_thermos_bottle_work http://wiki.answers.com/Q/How_does_a_thermos_bottle_work This doesn't mean a vacuum thermos won't lose heat, it only means the rate of heat loss as a function of time is greatly reduced.