3 ms·
My experience with machining fittings was that I could see a gap of 100 um and I could feel a step of as low as 10 um. This was also the limit of the machining
by weinzierl 13y ago
My experience with machining fittings was that I could see a gap of 100 um and I could feel a step of as low as 10 um.
This was also the limit of the machining and measurement equipment, so I don't know if I could have felt smaller steps.
Machining gave me a sense for dimensions in the micrometer range. I think of 1 um = 1000 nm = near infrared,
visible light ends at 800 nm. It makes the phenomenon of light somehow tangible.
- XorNot 13y agoWhen making nanocubes, you could still resolve that they were square even at 100 nm with an ordinary light microscope, which was a surprising (yet kind of obvious in hindsight) discovery for me. This does make me wonder if it would've been possible to feel them.
- weinzierl 13y agoMaybe I'm missing something, but I think physics prevents this. An excellent lens has a numerical aperture of maybe 0.95 at best, so with Abbe's formula you get a resolution limit of maybe 200 nm at best. With an oil immersion microscope (still a light microscope, albeit not an ordinary one) you might get as low as 100 nm, but that doesn't mean you could see that fact that the tubes are square. It's a long time since I've heard physics and that I've been in an laboratory, so maybe I'm wrong.
- XorNot 13y agoNo you are right - I kind of buried the lead there. The cubes themselves have a side-length of 100-120nm, but it means the longest diagonal length is actually more like ~211nm. But there's also the 2D diagonal which is 172nm, so what seems to happen is you end up seeing two slightly super-imposed and different shaped blurs, whereas normally you'd see just the 1 if they were perfect spheres.