4 ms·
I research, build and fly "drones". Great, maybe you can bring some information to the discussion. For the type of drone you are best informed about, what is
by michaelt 13y ago
I research, build and fly "drones".
Great, maybe you can bring some information to the discussion.
For the type of drone you are best informed about, what is the maximum round trip flying range, assuming you adjusted the weight of batteries to maximise flying range and there was no wind and no worries about radio range or line of sight?
What about if you were carrying a 1 lbs / 0.5 kg payload in the outbound direction?
What would the round trip time and average flight speed be?
What would the retail cost of such a drone be, if I wanted to order a kit today?
- skorgu 13y agoI'm not the parent poster and I don't know how representative of the current state of the art but here's a quadcopter going 12km (~7 miles) one way with an unspecified 'hd camera' payload [0]. They claim 88 minute hover endurance. I don't know if ~tripling that performance is in the realm of non-breakthrough engineering improvements but it seems at least order-of-magnitude close. [0] http://www.uasvision.com/2013/06/25/unmanned-microdrone-crosses-the-alps/ http://www.uasvision.com/2013/06/25/unmanned-microdrone-cros...
- beambot 13y agoI'll add a few questions: - Can you ensure safe failure modes for your in-flight drones? - Who assumes liability when your drones crash? - What is the blade tip speed during operation? What precautions do you take when flying in populated areas?
- skorgu 13y agoI'm not the original asker but these seem to have obvious first-draft answers: - Add rotors. The demo video showed an 8-rotor drone, I can imagine that building it as a pair of parallel quad rotors from the power supply point of view would give you quite a bit of control even at a 50% loss. A single-engine loss is obviously fairly small beans. I'm emphatically not an expert so this is armchair engineering. - I don't know why anyone would ask this question. The answer is trivially obvious (the operator of the drone, whichever legal entity that ends up being modulo whatever insurance they certainly have). Obviously "it could crash" is hardly novel in other delivery services and yet they seem to survive the liability question without issue. - Probably quite dangerous. I imagine you want to fly quite high for cruising for obstacle-avoidance and noise anyway so 90% of your distance this isn't a problem. I think the answer here is "don't hit people" just like with existing forms of transportation (or more realistically "be as careful about not hitting people as your liability insurance continues to reward you for").
- ericd 13y agoYep, the 8 rotor setup is largely for redundancy. There are examples of quads flying with half of their rotors damaged, albeit in a very degraded sense. And with regards to the blade speed, you can make it largely a non-issue by using shrouds/wire mesh. People don't worry about the blade speed of a floor standing fan even as they brush up against it.
- commandar 13y ago>Add rotors. The demo video showed an 8-rotor drone, I can imagine that building it as a pair of parallel quad rotors from the power supply point of view would give you quite a bit of control even at a 50% loss. A single-engine loss is obviously fairly small beans. I'm emphatically not an expert so this is armchair engineering. Well, the thing about a multirotor is that a motor failure is going to drastically throw off the stability of the aircraft. The controller would have to be able to recognize the failure, kill the faulty rotor hub, and compensate on the remaining motors in very short order to keep the airframe from getting so far off balance that it tumbles out of the sky. Though, honestly, I'd think the controller or battery failing is a more likely mode of failure than one of the brushless motors suddenly dying.
- skorgu 13y agoAha! I couldn't find the video quickly for my first post but I finally stumbled on it. Granted this is in ideal laboratory conditions but: http://www.youtube.com/watch?v=bsHryqnvyYA&t=22 http://www.youtube.com/watch?v=bsHryqnvyYA&t=22
- m4x 13y agoThe controller is already responding to changes in balance at an extremely high rate. How do you think these things fly in the first place? Like an earlier poster acknowledged, the current hobby grade gear is not really engineered with industrial use in mind, but that's a fairly simple engineering problem which has already been solved by the groups who are using drones commercially (i.e. the military) I have no doubt what so ever that Amazon, Google etc have the engineering chops to bring the software and hardware being used in drones up to an industrial grade. Don't assume that because the first thing that you thought of upon hearing "delivery drones" is infeasible that the whole idea is unworkable. It just needs an engineer with a little more imagination Edit: a couple of obvious solutions to your battery/controller failure mode would be a) use redundant controllers. They're small enough that you could easily have two or more running in tandem and checking eachothers integrity, and b) if you lose main battery you can autorotate down and land somewhere reasonably safe. If you use EDFs/shrouded blades they aren't a safety issue, and building a map of safe landing zones for a city is not a huge ask for somebody like Google. Now for somebody else willing to use their imagination: what do you do about cheeky individuals interfering with your drone during delivery?
- Crito 13y ago"- What is the blade tip speed during operation? What precautions do you take when flying in populated areas?" I've been thinking that a SawStop-type of technology might be a possible solution there.
- m4x 13y agoI think shrouds are probably safer. For saw-stop to work the blades would need to be quite heavy duty (vs. the thinner blades that are common now - those would simply snap off if you tried to stop them in a hurry!), and heavy duty means more load on the motors, lower response time etc. Additionally, if you're going to allow the blades to hit anything you more or less need to accept that it will result in a crash, even if you stop them immediately. Better to just guard them from contact in the first place.
- 5avage 13y agoI think most people imagine these things buzzing around at treetop level but there's no reason not to go up a bit higher, just below aviation floors (500 feet in US I think). As long as it was at altitude a simple parachute could save it from a majority of (bad) crashes. It would only need a vertical "tunnel" to safely descend/ascend within.
- lightbritefight 13y agoThere was TED talk[1] a few months ago about some guys using the exact same tech to build a "matternet" in africa and south america to combat washed out roads. Their estimate was that to move a 2kg load over 10km would cost roughly $.24. This includes fuel, initial purchase price of the drone (3k or so) and wear and tear. In their system, they use elevated platforms where the drones could drop off packages/change batteries. If feasible, this solves the distance problem. They estimated that to cover a 140km square area, it would cost 900k, require 50 towers and 150 drones. [1] http://www.ted.com/talks/andreas_raptopoulos_no_roads_there_s_a_drone_for_that.html http://www.ted.com/talks/andreas_raptopoulos_no_roads_there_...
- headShrinker 13y agoThese are pretty specific questions and would vary depending on the model and config. So my answer will be purely hypothetical. I have built and flown quadcopters the most. My most efficient configuration with high quality motors was very fast at about 50mph and could sustain that speed for 8-12 minutes depending on battery size, making the maximum distance 10 miles. Currently that is extremely far for a quad copter to fly. It could hover for about 18 minutes. The quad weights in at 3 lbs so adding another pound would drastically reduce its range. Cost to build this cheaply; Motors $200, long range tx/rx $350, flight controller w/ gps $70, ESCs $60, frame materials $60, battery $50, remote controller $50, wiring $10, props $60. This drone could be built for around $1k. It should be noted that while quads are more efficient they are also the most limited by payload. Ramping to a hex octo or deca would increase payload and potential battery size, and potentially flight time/distance, however efficiency tends to tick down.