6 ms·
Will aluminum Ford F-150 be a rolling beer can?
- dded 13y agoCar and Driver once had a piece about a largely aluminum Audi that they were reviewing [1]. They got into an accident (not terrible--no one hurt), and the $30,000 repair took months at the only facility in Michigan that could repair aluminum-built cars. Now the Audi used aluminum in its frame, and maybe that's all the difference in the world, but I'd like to see Ford address repairability. Otherwise, I'd welcome not only the weight reduction, but the avoidance of rust and body rot. [1] http://www.caranddriver.com/reviews/2007-audi-s8-long-term-road-test http://www.caranddriver.com/reviews/2007-audi-s8-long-term-r...
- Gravityloss 13y agoI have an aluminum Audi A2, and it's great! The fuel economy is good, and it's perky because of the lightness. Also happens to be one of the most reliable vehicles in it's age group. It drives really well because of the low center of gravity and thoughtful suspension, even if it is narrow and tall on the outside. It's actually a car that has been coherently designed. http://www.motormobiles.de/motor/a2i.jpg http://www.motormobiles.de/motor/a2i.jpg The model was too expensive to produce and was cancelled by Audi in 2005. No aluminum Audis after that except some sport models. It's sort of a hidden gem. To an outsider, making a big pickup truck from aluminum is like creating a paperweight out of some expensive lightweight material. Isn't the whole point of a pickup to most people (not all) being imposing and bulky? They even mention the 5000 pound weight in advertising, I assume they try to impress that it weighs a lot.
- dded 13y ago> The model was too expensive to produce Due to aluminum? > Isn't the whole point of a pickup to most people (not all) being imposing and bulky? This is a whole discussion in itself. Modern pickups, to my eyes, look more like cartoons of pickups. The manufacturers (in my mind, especially Nissan and Ford) go out-of-their way to add big, chunky fenders and grills and such. It must sell. And small trucks are disappearing: Ford's Ranger is gone in the US market, and Toyota's Tacoma is now as big as the F150 of a decade or two ago.
- douglasfshearer 13y agoThe fuel efficiency of the A2 is mostly due to it being a small car with a small engine. However if they saved 100kg from the body mass, that's l0% of the A2's overall mass. Shame they cancelled it, people who had them loved them.
- blt 13y agoCool photo. Bare aluminum is really shiny and attractive compared to mild steel. What are your maintenance costs on the A2? I need a new used car...
- Gravityloss 13y agoThe windshield wiper motor died and I ordered a new one from a German web shop Audi Zentrum Göttingen for 100 euros (payment with Paypal), and a small town VAG specialist changed it. There are lots of repair shops around here that fix these cars just fine, even when they weren't imported here when they were new. So all cars are second hand imports. The wiper motor part cost would have been more than double locally. It helped to know some German. :) Then the rear brakes also had to be fixed for the yearly checkup, normal wearing parts. And the internal heater had a connection problem, discovered when it started being cold enough that it was used (it's an aftermarket job anyway, to connect the car to an electricity outlet and warm up the engine block with a resistor and the interior with a resistor+fan). I've had the car for six months and from rough memory, spent maybe 400 euros for maintenance.
- jcoby 13y agoI don't think body shops will much care either way once they get over the initial shock and how to prep for paint. Most body work these days is remove & replace of large panels. Instead of welding they will have to use adhesives (or train their workers to use a TIG) and they will need to have a dedicated set of abrasives for the aluminum work. Aluminum damage to the structural (sub)frame is a whole different beast than in the (non-structural) body panels. Aluminum work hardens when bent. When it hardens it become brittle and can crack from stress and vibration. Any damage has to be completely replaced with fresh metal. Corrosion is still an issue with aluminum though it tends to self-protect itself. If you really want to mess up something aluminum add some mercury..
- Sanddancer 13y agoMore often than not, repair places simply replace body panels as it is, because trying to fix much more than minor dings tends to be more labor intensive than just putting a new one on. So for the average service shop, it wouldn't be much difference.
- adestefan 13y agoHow is this any different than most body panels now being a composite material? Body shops usually just buy a whole new panel and then paint to match.
- gyc 13y agoThe Acura NSX had an aluminum body back when it was first introduced in 1990. I'm glad to see aluminum bodies now being used in more mainstream vehicles.
- deleted 13y ago[deleted]
- ericcholis 13y agoWouldn't the lack of weight be a factor in snow, or generally poor-traction situations? Being in Buffalo, NY I already see plenty of trucks fishtailing as it is. Disclaimer: Truck !== Good in Snow
- discardorama 13y agoWhatever happened to putting sandbags in the back of the truck? When I lived in Buffalo, that was the preferred method of adding extra weight in the winter. Bonus: free sand in case you got stuck somewhere :-D On the flip side: how will the ever present salt affect the aluminum body?
- ericcholis 13y agoYea, sandbags are the preferred method. Problem is, there are quite a few people that still think having a truck makes you impervious to poor driving conditions...and they skip the sandbags. All metals will corrode in the presence of salts. Though aluminum does not exhibit rusting like steel does, it will develop a chalky film and pitting in the metal surface when exposed to salt for long periods. I believe that this is aluminium oxide. Some reading: http://www.boatingmag.com/how-to/maintenance/protecting-aluminum-boats-salt-water-corrosion http://www.boatingmag.com/how-to/maintenance/protecting-alum...
- sejje 13y agoSo then the lack of weight won't really be a factor in the snow. The ignorance of some owners will be.
- geoffeg 13y agoMany cars prior to the F-150 have had aluminum bodies (Land and Range Rovers, for instance) that sold well. I would think that many truck drivers are more concerned with towing capacity, power and fuel economy than the specific metal the body is made from. Besides, the aluminum won't rust!
- protomyth 13y agoIf you're buying a F-150, you are more concerned with it holding up[1]. This is the vehicle of construction sites and farmers. It is truly the vehicle of I need to haul that stuff over there where they might not be a road. The concern is that the 2014 F-150 will not hold up and be more expensive to repair. This is Ford's flagship vehicle. It cannot just sell well, it must put up amazing numbers. Its the iPhone of the car world. 1) the F-150's gas mileage isn't stellar, but it does even out when hauling.
- mcguire 13y agoMy initial concern would be metal fatigue, if they're building the frame from aluminum. But that's a hardware problem and I'll assume they've thought about it first. The rollout of the EcoMod twin-turbo six-cylinder in the F-150 gives me some faith that they're not the usual run-of-the-mill idiots.
- douglasfshearer 13y agoThe Land Rover has had an aluminium body since 1948, plenty of time to figure out if it's a good or bad choice for an off-road vehicle. There seems to be a lot of FUD around the new F-150, and as a European, it's hard not to see the similarities with U.S reactions to small turbocharged engines, and smaller vehicles in general. * https://en.wikipedia.org/wiki/Land_Rover_Series https://en.wikipedia.org/wiki/Land_Rover_Series
- xyzzy123 13y agoAnecdata: I've seen two of those old-school aluminium body land rovers, still running.
- draker 13y agoThe series LR's had complete Birmabright (aluminum/magnesium alloy) bodies; though the more recent models Discovery I/II, LR3, Range Rover have used only aluminum body skins.* Meaning the structural body is steel, though the outward panels are aluminum. The 2013 Range Rover has a complete aluminum body (skin and structure), with a 700lb weight reduction for US models.[1] 1. http://www.caranddriver.com/news/2013-land-rover-range-rover-photos-and-info-news http://www.caranddriver.com/news/2013-land-rover-range-rover... * Various differences among models some have steel roofs, doors etc.
- cpfohl 13y agoWho knows. It will make firefighters' jobs a lot more interesting at accident scenes: http://www.youtube.com/watch?v=_z2uwC4mvoY http://www.youtube.com/watch?v=_z2uwC4mvoY
- al2o3cr 13y agoIf you've hit something with enough force to turn the body panels into powder, they won't need firefighters - just a MOP...
- InclinedPlane 13y agoSteel can burn too. Generally you don't get conditions that can cause ignition of bulk steel or aluminum in automobile fires though.
- auctiontheory 13y agoF-150 will blaze the way. Ha. The first time one of these catches fire, it will put the Tesla to shame. http://www.g2mil.com/aluminum.htm http://www.g2mil.com/aluminum.htm
- al2o3cr 13y agoTry reading to the end of the link.
- cpncrunch 13y agoIf you look at the wikipedia page for that ship, you'll see that is isn't even built from aluminium! Really, that link is a bunch of crap. When was the last time you heard of a plane's aluminium skin catching fire (apart from when there is a bunch of avgas or jet-a on fire?)
- recursive 13y agoNo. It will not. But it may be made of aluminum. What's with this headline?
- nathos 13y agoBetteridge strikes again! http://en.wikipedia.org/wiki/Betteridge's_law_of_headlines http://en.wikipedia.org/wiki/Betteridge's_law_of_headlines
- dded 13y agoThe headline addresses the very real concern that Ford has with the image their customers might have with an aluminum truck. They're concerned that people might equate aluminum with flimsy. Expect competitors to encourage this thinking (till their own aluminum designs are ready). Image is very important in the pickup truck market. But to give potential critics some credit, aluminum can be made very thin, like a beer can, in which case it is flimsy. It can also be made thicker, like the aluminum siding of the 60s and 70s, in which case it may still ding easily and lose its appearance.
- Theodores 13y agoI am glad to see that trucks are catching up with bicycles! The bicycle business moved to aluminium a generation ago. For at least a decade carbon fibre has been the material of choice for road bikes. Nowadays if you are from the school of 'steel is real' then you are going to have to buy a cheap 'bicycle shaped object', get something custom handmade or go for something deliberately hipster-retro. Clearly there have been aluminium bodied cars for some time, even a 'truck' if you count the Land Rover. However, there is aluminium and there is aluminium. I suspect that the new Ford truck has a bit more to it than the Land Rover (or even the Audi A2) has. In the bike business there is 6 series aluminium and 7 series aluminium, to name the most popular alloys. The original aluminium frames were welded together tubes, for a while 'bonding' was experimented with but that proved to be unreliable. The current state of the art is 'hydroformed' aluminium, welded. The 'hydroformed' frames are works of art, with the metal where you need it for strength, the grain structure also aligned for strength. The tubes are anything but plain cylinders and much more useful for design than was possible in the days of steel. Does anyone have any more technical information on what the processes and alloys are going to be on this new-fangled truck?
- snth 13y ago> Nowadays if you are from the school of 'steel is real' then you are going to have to buy a cheap 'bicycle shaped object', get something custom handmade or go for something deliberately hipster-retro. Not entirely. http://surlybikes.com/ http://surlybikes.com/ Steel is still cheaper, easier to fix, and more comfortable.
- Theodores 13y agoAs it happens I ride steel, primarily for the first reason you mention! I am also from the UK and I was over-generalising about what is available. There are plenty of people that still prefer steel, this is something I like about bicycles, there is a lot more individuality going on with bikes than you get (generally) with motoring.
- haberman 13y ago> Nowadays if you are from the school of 'steel is real' then you are going to have to buy a cheap 'bicycle shaped object', get something custom handmade or go for something deliberately hipster-retro. You might consider this to be in the second category, but here is a high-end bicycle maker that does exclusively steel frames: http://www.rodcycle.com/ http://www.rodcycle.com/ Here is their advocacy for steel frames: http://www.rodbikes.com/articles/steel.html http://www.rodbikes.com/articles/steel.html
- listrophy 13y agoAerospace engineer here, weighing in... I have two areas of expertise on this matter. First, I was on UW-Madison's competition-winning FutureTruck team about 10 years ago. We were, IIRC, the only team of about 15 other universities that replaced our competition car's (a Ford Excursion) entire frame with aluminum. In addition to replacing many other steel parts/assemblies with aluminum equivalents, we managed to bring the newly parallel hybrid SUV under stock weight... despite adding a large battery pack and motor. The thing I learned from this experience was: even though aluminum has about 1/3 the density of steel, your parts end up being about 50–55% of the steel weight because you need to add more aluminum to maintain equivalent strength. Basically, given the same tensile strength properties of a part, an aluminum one will be about half as heavy. Second, I worked as a payload mechanical engineer for a number of spaceflight systems. Suffice to say, our base material for consideration was aluminum. Sure, we deferred to steel for certain applications (e.g., ball bearings, rat cage bars, fasteners, etc) and to myriad materials in others, aluminum was the standard. It has a tremendous strength/weight ratio, can be alloyed in many different ways to get different characteristics, is non-magnetic, is relatively cheap, and can have a number of interesting surface coatings applied. About the only major systemic problem aluminum has is that it is difficult to weld. Not impossible, as my FutureTruck experience tells me, but difficult. It didn't matter to us, though, since NASA generally frowns upon welded joints anyway. Too much strength variation due to heat stress and potential for FOD if not ground properly. Anyway, I've been waiting for the auto industry to catch up to a bunch of college students for 10 years now. Nice to see one of the Big Four finally getting it. And cheers to the smaller car companies that have been doing it for years.
- dded 13y agoSince you seem to have some expertise, maybe you can answer this question: Is there a work function difference between steel in contact with aluminum, and does it accelerate corrosion in the steel?
- listrophy 13y agoThe three main things to be concerned about are corrosion, galvanic corrosion[1] and galling[2]. Corrosion is more commonly known as rust, but that's technically reserved for steel (or, more accurately, iron) oxidation. Aluminum certainly corrodes, but it corrodes into aluminum oxide, or alumina, which is actually a ceramic that is stronger than aluminum. In fact, good luck using aluminum without a coating of alumina... it naturally occurs on the surface of atmospherically exposed aluminum. As a result, when a chunk of aluminum is broken off of a larger piece, the material almost immediately forms a protective layer of alumina. It's almost like aluminum self-heals in the presence of oxygen. Galvanic corrosion occurs when dissimilar metals come into contact amidst an electrolyte solution. In the case of vehicles, that's usually seawater/sea-mist or salted winter roads. While saltwater is also responsible for accelerating normal corrosion, it also plays a part in galvanic corrosion. So yes, having aluminum and steel touching is a recipe for galvanic corrosion, but galvanic corrosion is not black-and-white. Each metal has an anodic index; a high or low anodic index doesn't matter all that much. What matters is the difference between the anodic indices of the touching metals. For aluminum and steel, that difference is quite small, so galvanic corrosion isn't a huge issue, but it's not negligible either. Galling occurs when the sliding friction of two parts, say a screw and its threaded mate, results in plastic deformation, usually in the more ductile of the two pieces. This generally doesn't come into play in the construction of a vehicle because many parts are attached either by welding or by a bolt-nut combo. Choosing the correct materials for the bolts and nuts (basically, just use hardened, but not stainless, steel) gets rid of this concern in most cases. In cases where one must screw a steel fastener into a threaded aluminum piece, a helical insert is usually prescribed. While many manufacturers make these, we typically used Helicoil for spaceflight ops because they're tested and rated for spaceflight (batch traceability, proper composition docs, etc). [1] https://en.wikipedia.org/wiki/Galvanic_corrosion https://en.wikipedia.org/wiki/Galvanic_corrosion [2] https://en.wikipedia.org/wiki/Galling https://en.wikipedia.org/wiki/Galling
- dhughes 13y agoOn PBS where I saw a brief description of aluminum and how difficult it was to refine and even when abundant supplies were available it's a soft metal if not an alloyed with copper or other metals. And the alloy is still soft unless it's forged correctly it takes time and heat, or so the show indicated, it was quite interesting. For all that work you'd think these days carbon fibre would be just as good, economically-wise.
- blt 13y agoAll pickups use body-on-frame construction (image: http://bit.ly/1cFsxn2 http://bit.ly/1cFsxn2). The backbone that bears most of the load remains steel. It probably always will, because the strength requirements would necessitate a huge, expensive chunk of aluminum. If the bed interior is aluminum, they will have to increase the thickness compared to steel, but it will do just fine at distributing the load to the frame. Aluminum has a softer surface and will scratch easier. I'm guessing the Aluminum F-150 will come with a bed liner from the factory.
- dded 13y ago> All pickups use body-on-frame construction Including the Honda Ridgeline? I thought that was an exception. In any case, you're mostly right, and that design is unlikely to change. Folks who actually use trucks in their work often bolt on various different styles of body: contractor bodies with large storage cabinets on the sides, enclosed van-like boxes, dumping beds, etc. But frames can certainly be made of aluminum. The East company, which makes flat-bed and dumping trailers for semis, makes frames from aluminum. An unloaded, aluminum-framed flat-bed is very noticeable for its pronounced arch. The scratchable surface of the bed will be paint, just as in the steel models.
- bradleyland 13y agoThe Honda Ridgeline is generally classified as a "sport utility truck", a category in which you'll also find vehicles like the Chevrolet Avalanche and Ford Explorer Sport Trac. It's basically an SUV (which are commonly unibody) without the rear enclosure. The distinction is that their primary design purpose is aligned more with that of an SUV than that of a pick-up truck. I'm not aware of any true pick-up that uses a unibody design, and probably for the reasons you've stated.