3 ms·

> last I checked there's still a long laundry list of non-default incantations to optimize SSD usage on Windows Would you mind listing them?

shocks 13y ago
Here is a great guide: http://www.overclock.net/t/1156654/seans-windows-7-install-optimization-guide-for-ssds-hdds http://www.overclock.net/t/1156654/seans-windows-7-install-o... :)
- justin66 13y ago
  I didn't notice any genuinely bad advice when I gave that a quick once-over, but I'm pretty sure none of it is actually necessary to make TRIM work on Windows 7. Verifying the AHCI setting in the BIOS is good advice but might not always be necessary, depending on the SSD.
  - cookiecaper 13y ago
    TRIM is just one component of an optimal SSD configuration, and it's somewhat overrated. It should be on by default, but it's not the only consideration for good SSD performance.
    - justin66 13y ago
      Is there a more important factor than TRIM in preventing performance degradation over time? (aside from just not letting the drive get too full) It _all_ might be somewhat overrated. I've certainly never worried much about all this stuff, and my SSDs still perform phenomenally well. I used one in my old Macbook well before OS X supported TRIM and all was well, although I have to admit that on another machine I thought for sure Linux was taking care of TRIM for me. Apparently not.
- wfunction 13y ago
  Looks 99% BS to me, and the other 1% seems to be unnecessary. Would you mind listing the items you think are actually necessary here, instead of pointing me to a 489-page forum thread?
  - jodrellblank 13y ago
    From near the top of the opening post: A quick word on SSDs: SSDs do NOT require the confusing and intense setup that a lot of people seem to suggest. The current day SSDs are much more reliable and literally all that is necessary is to change the SATA mode to AHCI or RAID in the BIOS/UEFI, install, and you are good to go.
    - justin66 13y ago
      Even the move to AHCI isn't strictly necessary with most drives.
    - wfunction 13y ago
      Yeah I saw, it made me wonder why @shocks linked me to it...

shocks 13y ago

Here is a great guide: http://www.overclock.net/t/1156654/seans-windows-7-install-optimization-guide-for-ssds-hdds http://www.overclock.net/t/1156654/seans-windows-7-install-o... :)

justin66 13y ago
I didn't notice any genuinely bad advice when I gave that a quick once-over, but I'm pretty sure none of it is actually necessary to make TRIM work on Windows 7. Verifying the AHCI setting in the BIOS is good advice but might not always be necessary, depending on the SSD.
- cookiecaper 13y ago
  TRIM is just one component of an optimal SSD configuration, and it's somewhat overrated. It should be on by default, but it's not the only consideration for good SSD performance.
  - justin66 13y ago
    Is there a more important factor than TRIM in preventing performance degradation over time? (aside from just not letting the drive get too full) It _all_ might be somewhat overrated. I've certainly never worried much about all this stuff, and my SSDs still perform phenomenally well. I used one in my old Macbook well before OS X supported TRIM and all was well, although I have to admit that on another machine I thought for sure Linux was taking care of TRIM for me. Apparently not.
wfunction 13y ago
Looks 99% BS to me, and the other 1% seems to be unnecessary. Would you mind listing the items you think are actually necessary here, instead of pointing me to a 489-page forum thread?
- jodrellblank 13y ago
  From near the top of the opening post: A quick word on SSDs: SSDs do NOT require the confusing and intense setup that a lot of people seem to suggest. The current day SSDs are much more reliable and literally all that is necessary is to change the SATA mode to AHCI or RAID in the BIOS/UEFI, install, and you are good to go.
  - justin66 13y ago
    Even the move to AHCI isn't strictly necessary with most drives.
  - wfunction 13y ago
    Yeah I saw, it made me wonder why @shocks linked me to it...