4 ms·
That is far more impressive than my one attempt at modifying my bed, which no one would attach the word "genius" to...the most likely word I would have earned w
by tzs 13y ago
That is far more impressive than my one attempt at modifying my bed, which no one would attach the word "genius" to...the most likely word I would have earned was "special".
I was living in a small rectangular room at Caltech, with the door on one of the short sides and a window and radiator on the other short side. My bed was a rectangular framework that the mattress sat on top of. The long sides of the bed were parallel to the long sides of the room, said orientation being forced by the narrowness of the room.
The pillow side of the bed was toward the window and radiator. I decided I'd rather sleep with my feet on that side and my head on the other side.
One afternoon, I set about reorienting the bed to accomplish this. Because of the narrowness of the room, both horizontally and vertically, it was quite a challenge to flip the bed around, but after quite a struggle I accomplished it. While I was doing this, a small crowd had gathered to watch (but not help...the bastards).
After I finished, the spectators pointed out that the bed frame and mattress were symmetrical, and the sleeping orientation was determined entirely by what side you tucked the sheets under and where you put the pillow. Flipping the sleeping orientation would have taken a normal person 10 seconds.
Doh!
- pestaa 13y agoI was looking forward to this very happy ending.
- gohrt 13y agoYour way didn't require you remove the sheets and remake the bed. Your way wins.
- icebraining 13y agoObligatory: http://assets.amuniversal.com/668fea605e0a012ee3bf00163e41dd5b http://assets.amuniversal.com/668fea605e0a012ee3bf00163e41dd...
- jasonkester 13y agoWhile we're on Dorm Room Modification stories... A buddy of mine lived in one of those extra cheap campus dorms where each room is a mirror image of itself with a bed and desk against each wall with a bookshelf bolted to the wall above. I was hanging out on the evening when he decided to take down one of the bookshelves. I never got a chance to ask quite why he was unbolting the thing from the wall, because no sooner had he removed the 3rd bolt than there was this enormulous crashing disaster in the room next door. Sure enough, glancing across at the opposite wall, the bookshelf on that side had a washer and a nut threaded onto the end of a bolt.
- Aardwolf 13y agoWow that room layout sounds a lot like my dorm, except we had two bookshelves, and they were not bolted through the wall like that, some people could remove them and put them vertically to have a vertical cabinet.
- aquadrop 13y agoI bet your friends had pretty fun time :) These 'Doh' situations happen to everyone. I once carried large heavy wheel for about 50 meters before I realized I could just roll it on the ground :) Regarding to hacking around I think almost everyone could do something if he just stop and try to think what could be done. We often don't notice opportunities right before our noses because we simple don't focus on trying to do something with it. I myself enjoy that type of hacking. Recently we had some reconstruction at home and we had some leftover materials in garbage pile ready to be thrown away. So I grabbed one leftover ceramic floor tile, couple of stair wooden balusters and some thin plywood. I sawed each baluster in half (they had central symmetry), screwed them to plywood on both sides, glued ceramic tile to plywood from one side and small pillars to the other side and then painted wood. Couple of hours of work and got myself a pretty slick looking side table, which I needed at the time :) The only thing I bought were small silver pillars which cost couple of dollars. Here's photo: http://i.imgur.com/6OsLDPu.jpg http://i.imgur.com/6OsLDPu.jpg Bender's picture is also some kind of hacking, I printed picture at the local photo workshop and made the frame from a very cheap plastic ceiling plinth.
- kmfrk 13y agoMy self-esteem is absolutely crushed, every time I encounter one of those everyday puzzles, which includes fitting a very tight cover on my mattress. I wish I could reduce it to some algorithmic problem, but by the end of the day, I look like someone wrestling an alligator, as I struggle to put it on.
- izendejas 13y agoStart on the far end and pull the sheets towards you. That is, if your bed is next to a wall or two (as usual), start with the corners next to it, this way you never have to kneel over the sheets. If possible you can also move the bed and walk around. This one took me a while to figure out, but was proud when I did. :)
- eru 13y agoBend the mattress.
- ChuckMcM 13y agoWe put hammocks in our dorm room to free up the beds for construction materials. Except we didn't count on the steel studs, which when were both in our hammocks caused one wall to bow in ominously. The whole lie in the hammocks with our girlfriends thing was clearly not going to work. :-)
- cesarbs 13y agoWhen I relocated to work for my current employer, they put me on a temporary house which had three floors. When I arrived from the airport with a huge suitcase, I almost died of exhaustion taking it upstairs (it was really large and heavy!). Only then I realized I could have left the suitcase downstairs and taken my stuff upstairs in smaller batches... Doh! On a related note, I wish my wife was with me at the time. I often tell her she's the smart half of the couple, since I repeatedly have these "Doh!" moments but when she's around she is able to correct me and show me there's a simpler way :)
- eru 13y agoDo Americans really tuck sheets? How does one sleep with tucked in sheets?