3 ms·

Since you seem to know what's going on, my question is: how can I seamlessly use ipv6? And how can I do that with Windows and Linux?

IgorPartola 13y ago
What a good looking question! The idea is that you want a dual stack environment where IPv4 and IPv6 coexist. Mac, Linux, and Windows all support this and do the right thing: if IPv6 is available on the client and server they try that first, if not they use IPv4. Since you are asking I am assuming your ISP does not provide native IPv6. If you have a public IPv4 address that does not change more frequently than every several hours, the best solution is to set up a 6in4 tunnel (ignore any docs that refer to 6to4, different beast). Sign up for an account at TunnelBroker.net and create a regular /64 tunnel. What this will do is that your router will encapsulate your IPv6 packets inside IPv4 packets and send them to a Tunnel Broker router. That router will then strip the IPv4 header and send the packet off as a pure IPv6 packet. In most cases latency is measured in milliseconds and you might actually see lower latency since IPv6 servers and routes are currently less utilized. YouTube is certainly faster. After you have your account and tunnel set up, it is best to set up your tunnel end point on your home router that supports TunnelBroker.net. Anything that runs OpenWRT does this, as do some commercial router firmware. OpenWRT is great for many reasons so you should use that anyways, this is just a bonus. After your router is able to reach IPv6 hosts (google.com), you would set up and enable a service called radvd (router advertisement daemon) on your router. This will automatically give all the hosts on your LAN instant IPv6 connectivity. Lastly, you would set up an HTTP ping to Tunnel Broker to let it know if your IPv4 address changes. Once again, OpenWRT does this out of the box. I am writing this from my phone, so I cannot provide much specific advice, but email me at igor <at< igorpartola.com and I will answer any specific questions you may have.
- lelandbatey 13y ago
  Wow, this is really useful information, thank you! Since I wrote my original comment, I went out and started doing more research into this. At this point, I have my main home server[0] now accessible via IPv6 using freenet6. However, I did apply for SixXS, so I can hopefully put my entire house on it (my router's an Asus WL-520GU, which currently has DD-WRT on it, but is compatible with OpenWRT). Though I'll be looking more into the Hurricane Electric service. I'm really liking this, since now I can access my devices directly, without having to try to negotiate firewalls and weird subnets! Thanks very much for the advice!
  - IgorPartola 13y ago
    No problem! Very happy to convince someone new to try IPv6. Please feel free to get in touch if you run into trouble. Re: DD-WRT, last I checked it did not come with an IPv6 firewall, ip6tables. I ended up recompiling it using what seemed to be Voodoo magic (match the arch, release, kernel version, etc.) OpenWRT comes with the firewall on by default and a web GUI to control it. As for the different tunnel brokers (of which TunnelBroker.net is one), I should not assume you are in the US. Freenet6 is great. So is SixXS, though watch out to not lose credits and have your tunnel cut off. TunnelBroker.net is run by Hurricane Electric, has been rock solid for me and their support (for this free product) is fantastic. Also, check out dns.he.net to set up reverse DNS, or just use them as your DNS provider. This service is also very nice and free.

IgorPartola 13y ago

What a good looking question! The idea is that you want a dual stack environment where IPv4 and IPv6 coexist. Mac, Linux, and Windows all support this and do the right thing: if IPv6 is available on the client and server they try that first, if not they use IPv4. Since you are asking I am assuming your ISP does not provide native IPv6. If you have a public IPv4 address that does not change more frequently than every several hours, the best solution is to set up a 6in4 tunnel (ignore any docs that refer to 6to4, different beast). Sign up for an account at TunnelBroker.net and create a regular /64 tunnel. What this will do is that your router will encapsulate your IPv6 packets inside IPv4 packets and send them to a Tunnel Broker router. That router will then strip the IPv4 header and send the packet off as a pure IPv6 packet. In most cases latency is measured in milliseconds and you might actually see lower latency since IPv6 servers and routes are currently less utilized. YouTube is certainly faster. After you have your account and tunnel set up, it is best to set up your tunnel end point on your home router that supports TunnelBroker.net. Anything that runs OpenWRT does this, as do some commercial router firmware. OpenWRT is great for many reasons so you should use that anyways, this is just a bonus. After your router is able to reach IPv6 hosts (google.com), you would set up and enable a service called radvd (router advertisement daemon) on your router. This will automatically give all the hosts on your LAN instant IPv6 connectivity. Lastly, you would set up an HTTP ping to Tunnel Broker to let it know if your IPv4 address changes. Once again, OpenWRT does this out of the box. I am writing this from my phone, so I cannot provide much specific advice, but email me at igor <at< igorpartola.com and I will answer any specific questions you may have.

lelandbatey 13y ago
Wow, this is really useful information, thank you! Since I wrote my original comment, I went out and started doing more research into this. At this point, I have my main home server[0] now accessible via IPv6 using freenet6. However, I did apply for SixXS, so I can hopefully put my entire house on it (my router's an Asus WL-520GU, which currently has DD-WRT on it, but is compatible with OpenWRT). Though I'll be looking more into the Hurricane Electric service. I'm really liking this, since now I can access my devices directly, without having to try to negotiate firewalls and weird subnets! Thanks very much for the advice!
- IgorPartola 13y ago
  No problem! Very happy to convince someone new to try IPv6. Please feel free to get in touch if you run into trouble. Re: DD-WRT, last I checked it did not come with an IPv6 firewall, ip6tables. I ended up recompiling it using what seemed to be Voodoo magic (match the arch, release, kernel version, etc.) OpenWRT comes with the firewall on by default and a web GUI to control it. As for the different tunnel brokers (of which TunnelBroker.net is one), I should not assume you are in the US. Freenet6 is great. So is SixXS, though watch out to not lose credits and have your tunnel cut off. TunnelBroker.net is run by Hurricane Electric, has been rock solid for me and their support (for this free product) is fantastic. Also, check out dns.he.net to set up reverse DNS, or just use them as your DNS provider. This service is also very nice and free.