2 ms·
Short version is you're talking about a value, they're talking about a first derivative of that value. I can take two COTS cheap canned 64 MHz oscillator modul
by VLM 13y ago
Short version is you're talking about a value, they're talking about a first derivative of that value.
I can take two COTS cheap canned 64 MHz oscillator modules like the ones on your computer motherboard, and the mfgr claims they'll output something within 100 ppm of 64 MHz. Once the temp stabilizes they'll individually be WAY more stable than 100 ppm comparing right now to an hour ago, but whatever it is they oscillate at, it'll be within 100 ppm of each other.
If you graph the output of NTP, perhaps via Munin or any number of other sysadmin tools, you'll see most of those devices are very stable from hour to hour, at a basically fixed offset from the correct frequency.
A couple years ago there was a ham radio construction project in QEX etc along the lines of using a crude computer grade COTS osc, feeding it thru the equiv of a hundred-something times multiplier, and using it as a local oscillator. I built a couple and they're ridiculously stable, although all over the map. I don't have an 1152.000000 MHz oscillator although from memory they were all within 10 or so ppm of each other (better than the rated 100ppm)
Edited to add, if you're running Debian Linux and NTP, take a look at /var/lib/ntp/ntp.drift. The generic COTS dell 6-U server one of my images runs on, ticks very stable and precisely -40.069 ppm low compared to reality and it never varies. On the other hand, my "desktop" running basically the same software but on generic dell desktop hardware is at present running +9.615 ppm fast at this instant although it varies a bit more (probably due to temp swings).