4 ms·
It's remarkable how sensitive these things are. I had to do some really gnarly stuff to deal with some voltage backfeeding into my modem from a PoE on a wireles
by whalesalad 13y ago
It's remarkable how sensitive these things are. I had to do some really gnarly stuff to deal with some voltage backfeeding into my modem from a PoE on a wireless AP. It helped a lot but ultimately I had to get a tech out (Charter in SoCal). The guy installed what he referred to as a spider, which was a hand-made mess of filters and grounding adapters on the coax.
Google "high upstream power level" and there are bazillions of people suffering from this problem with all kinds of different solutions.
I'm in VA now with Cox instead of Charter, but dealing with a very similar modem and now, very similar problems. I'm gonna order another one (fairly cheap online) and see if I can do some of these modifications to improve performance and upstream power levels.
That or i'll cave-in and switch to Fios.
- fnordfnordfnord 13y agoHere, take this: http://www.murata.com/products/catalog/pdf/c39e.pdf http://www.murata.com/products/catalog/pdf/c39e.pdf
- mindslight 13y agoYou can probably achieve the same effect with more reasonable capacitors. I doubt those rails started off with one hundredth of the capacitance he added. Low-inductance decoupling across every chip supply is the extremely important part, and for that you really want ceramic surface mount caps either replacing or stacked on top of existing ones. I'd recommend skipping tantalum caps altogether and filling that size/freq tier with larger ceramic multilayers since you're not designing for cost. And of course low-esr electrolytics on the rails to reduce power supply ripple and all that. And some ceramic decoupling caps on both sides of switching regulators too. But definitely make sure the output of every voltage regulator (switching and linear) remains stable and hasn't started oscillating.