4 ms·
To me, the biggest failing of micro-USB isn't the up/down thing, but its inability to back-power the same port that is being used as a host. That is, if I have
by Pxtl 13y ago
To me, the biggest failing of micro-USB isn't the up/down thing, but its inability to back-power the same port that is being used as a host. That is, if I have a device with one port, I can't plug that device into a hub where it hosts devices and gets recharged at the same time. This is becoming an obvious flaw in the day of tablets-as-laptops - you can't make a "docking station" using a single USB port. Meanwhile, the iPod has been sporting docking stations that provide both audio/video out and charging since before the smartphone war.
- laumars 13y agoSure you can. USB has a dedicated pin for sending power down and it's been an integral part of the design since the start (USB 1.0). How do you think USB pen drives (et al) work when they have chips which need powering? Or USB "soundcards", wireless dongles, USB keyboards and mice? They all need powering and they all need powering while in operation. You might not be able to send higher charges while using data - I've not followed the spec that closely - but you can supply at least enough charge to keep the phone running even if you cannot recharge it. The reason you don't get docking stations for other phones is because every sodding phone puts their USB socket in a different place (and often it changes from model to model from the same manufacturer). This means whatever dock you build will automatically be fugly compared to iPhone/iPod docks because you'll need a USB cable. Which is why any such dock will either have a 3.5mm audio jack (TRS) and thus support any portable device, or use bluetooth for a wireless solution.
- simias 13y agoIsn't that limited at 0.5 amperes @5V? I believe it's not enough for all devices (or to charge them quickly enough). I believe there's a hack in the apple products that can be used to send more current through USB but it's not standard. I might be wrong though, it's been a while since I looked into that. Also, it's the reason why certain devices (notably external hard drives alimented through USB) come with two USB connectors in a Y configuration to be able to leech enough current from the host. At least that's how I think it works.
- mbell 13y agoAs a baseline it's limited to 100mA @ ~5V (150mA for 3.0). Devices can request additional power from the host, 500mA max for 1.X/2.X or 900mA max for 3.0. The host isn't required to be able to supply this much current, it can say 'no'. There are also some quasi standards and I believe now a real standard now for 'USB charging' which allows higher current (and voltage I believe).
- mbell 13y agoI think you're missing the issue here. The examples you've given are all with the 'host' powering the 'device'. e.g. Your computer powering your USB keyboard. 'Host' and 'Device' are specific modes of operation in the USB spec, it isn't multi-master. The problem is when you want the 'device' to power the 'host', as is often the case when the 'host' is something with a battery, such as a tablet. There is no support built into the USB spec for this, it is always assumed that the 'host' provides power to the 'device'. An example of something that isn't supported would be a tablet 'dock' with a bunch of device connectors that could also charge the tablet, all via a single USB link.
- laumars 13y ago> I think you're missing the issue here. The examples you've given are all with the 'host' powering the 'device'. e.g. Your computer powering your USB keyboard. 'Host' and 'Device' are specific modes of operation in the USB spec, it isn't multi-master. That's the only way you'd ever want to power a USB device though. It makes no sense to power the host from the device. Plus this isn't even the case with iPod docks - they're all powered in the mains. > The problem is when you want the 'device' to power the 'host', as is often the case when the 'host' is something with a battery, such as a tablet. The host on an iPod dock isn't the iPod; it's the dock. > There is no support built into the USB spec for this, it is always assumed that the 'host' provides power to the 'device'. An example of something that isn't supported would be a tablet 'dock' with a bunch of device connectors that could also charge the tablet, all via a single USB link. In this example, the dock is the host and the tablet is the device. So the tablet would still be charged. The thing with USB is, it doesn't matter which device is the server and which is the client at the software end as that's just an arbitrary software paradigm. You can have the USB host act as the client at the software end and the device as the sever (eg a music dock will be the host, but the phone is the server and the dock the client), all you need is the two devices to be able to speak to each other. And since USB is a two way protocol (else USB storage wouldn't work), it's pretty easy to have the host as the power source and the device as the item requiring USB power even when the device is the one sending signals back to the host (eg how USB mice and keyboards work).
- 13y ago