7 ms·
First Open Source Airplane Could Cost Just $15,000
- gokhanceliker 13y agoThe final cost of an actual airplane usually covers a lot of testing before going to market. It involves special test pilots that are ready to risk their lives while testing it. If we can find/fund a test pilot for this project, the price point can become a reality.
- techsupporter 13y agoIt's a light sport aircraft, akin to a "kit plane," so the person who builds it is the test pilot who is holding the risk.
- cjrp 13y agoBut the design itself has been tested by the manufacturer, it's just your implementation that's untested.
- TheAnimus 13y agoAlso you will need FAA inspection once it's been built if you are in the US. In the UK you need to get a permit to fly, as you can't get a CoA (Certificate of Airworthiness) because its an unlicensed build. Apparently (I've no first hand experience) these are rather thorough. However my concern with this is the traceability of parts and such. There is a reason why a single rivnut costs a fortune for a plane.
- jamie_ca 13y agoIn Canada, for a homebuilt LSA-equivalent you need to have the aircraft inspected and first flight performed by someone certified by Nav Canada. And no way he's going to risk his life in-flight unless he's pretty damn sure your aircraft is airworthy.
- zaidmo 13y agoI was wondering if the word "open source" is being used correctly in the context of aeroplane parts. Dictionary.com has 2 definitions: 1. Computers. pertaining to or denoting software whose source code is available free of charge to the public to use, copy, modify, sublicense, or distribute. 2. pertaining to or denoting a product or system whose origins, formula, design, etc., are freely accessible to the public. I guess the latter definition could apply, where the components can be produced (e.g. 3D printed) from detailed "open source" blueprints? However, I dont think the plane will be built from 100% "open source" rendered components. Generic or branded components may need to be purchased as well.
- alixr 13y agoThis is great, I've been wanting to get into aviation for some time but the barrier of entry is steep. Using their plans as a guideline for building an ultralight instead of a light sport aircraft would reduce the cost dramatically. Ultralights have much lower limits but don't require any formal training/licenses. In the end you could probably build an ultralight for the cost of a pilots license.
- ErsatzVerkehr 13y ago> In the end you could probably build an ultralight for the cost of a pilots license. ...but not know how to fly it.
- omegant 13y agoUltralight aircrafts are amazing and there are some of them more capable than a cessna in almost every aspect. But if you are going that route, please take in to account that they are very light and they flight very low, so you don't have too much energy to get hold in case of engine failure or bad weather (energy is EVERYTHING for a plane). There are too many people dying on light aircraft because they think they can fly like a top gun at 80 knots and 50' from the ground. Just look for a good instructor and if possible tale a couple of hours of aerobatic training, it will teach you how aircraft respond on low energy situations.
- mryan 13y ago> This is great, I've been wanting to get into aviation for some time but the barrier of entry is steep. There are some hobbies where starting without any prior knowledge and learning through a process of trial and error is fun and rewarding. IMHO aviation is not one of these hobbies. It tends to be rather unforgiving of the "error" part of the equation, especially if the error is something like "wings not correctly attached". :)
- mikeash 13y agoIt may be legal to fly an ultralight with no formal training, but I would strongly recommend against it. Attempting that is an excellent way to get yourself killed. The barrier to entry for aviation is not steep at all if you approach it with the attitude that flying with an instructor is still enjoyable flying. People often think that you need to drop a few thousand bucks on training before you can fly. But not so! You'll be flying right from the start. You'll be doing it with an instructor, but if you pick an instructor whose company you enjoy, that can be a bonus, not a drawback.
- rorrr2 13y agoFor those unfamiliar with planes, you can buy a used ultralite plane for under $10,000 in working condition. Something that has been proven to fly reliably.
- ErsatzVerkehr 13y agoIn the United States, the restrictions on an "ultralight" are rather severe: > The governing regulation in the United States is FAR 103 Ultralight Vehicles, which specifies a powered "ultralight" as a single seat vehicle of less than 5 US gallons (19 L) fuel capacity, empty weight of less than 254 pounds (115 kg), a top speed of 55 knots (102 km/h or 64 mph), and a maximum stall speed not exceeding 24 knots (45 km/h or 27.6 mph). Restrictions include flying only during daylight hours and over unpopulated areas.
- rorrr2 13y agoMy point was, the biggest barrier to flying is not the price of the plane, but the desire to jump through all the hoops to get the license, to spend time/money on maintenance, to spend time on driving to the airport.
- emiliobumachar 13y agoDon't forget the relatively high risk of general aviation.
- supernovae 13y agoIt's not a high risk mode of transportation.. It's about as "deadly" as driving a motorcycle. Sadly, if people paid more attention to motorcycles on the road, then motorcycles would be exponentially safer and if people stopped flying into bad weather then airplanes would be exponentially safer. With that being said, there is no "Relatively high risk of general aviation".. there are lots of careers and hobbies with a much higher risk.. in fact, if I remember correctly more people die of boating accidents going out on a lake than GA aircraft.
- worldimperator 13y agoIf bugfixing those planes will be as rigidly pursued as with some open source software, maybe the phrase 'buying a ticket' gets a totally new meaning ;-)
- emiliobumachar 13y agoI did not get it. Please clarify.
- _neil 13y agoI think it refers to the Hunter S. Thompson quote: "No sympathy for the devil; keep that in mind. Buy the ticket, take the ride." Basically meaning you may be getting in over your head, but you'll probably have a good story to tell if you don't end up dead. Similar to the idiom, "in for a penny, in for a pound."
- Zikes 13y agoI'm more inclined to think they were drawing a comparison between buying a ticket to ride a plane vs placing a bounty on a ticket/bug to be fixed.
- _neil 13y agoI'm inclined to agree with you. The bounty part of it didn't cross my mind.
- zeckalpha 13y agoOr the plane ticket / bug ticket distinction.
- glabifrons 13y agoI'd argue that the OpenEZ/OpenCanard project was the first... sadly it appears to be gone (the website, anyways). This sheds some light on it: http://www.homebuiltairplanes.com/forums/general-experimental-aviation-questions/7026-open-ez-templates.html http://www.homebuiltairplanes.com/forums/general-experimenta... Note: This was based on the LongEZ, originally designed by Burt Rutan... a pioneer in homebuilt/plansbuilt aircraft (and the winner of the Ansari X-Prize).
- ctdonath 13y agoTangent: predictions on a "3D printed plane"? Push a button, wait, result needs little more than an engine installed?
- rmason 13y agoI was always told that new planes were so expensive because manufacturers had to tack on a huge amount to the price for expected lawsuits. What I thought was original in this approach was how can you sue the manufacturer of a kit plane over its design if it's open source? Course lawyers will surely try so it has to be tested in court first.
- benbristow 13y agogit clone http://github.com/open-source-airplane http://github.com/open-source-airplane Damn, that didn't work.