3 ms·
Assuming the track was designed so the cars go forward no matter which direction you place them, the cars likely had a small diode-based circuit to always feed
by JoshTriplett 13y ago
Assuming the track was designed so the cars go forward no matter which direction you place them, the cars likely had a small diode-based circuit to always feed the current into the motor with the same polarity. When you fed an AC current into the track, that circuit in the cars would have acted like a rectifier, turning the AC into poor-quality, high-voltage DC.
The sparks would come from feeding way too much voltage in, enough to jump the gaps caused by momentary losses of contact between the track and a fast-moving car.
- speeder 13y agoDiodes! Great idea, I should have thought of that.
- mangamadaiyan 13y agoI'm guessing your mains supply would've been 230v/5A - in which case I have to say I'm surprised that it didn't blow the diodes out :) I remember plugging a 1N2001 (or similar) into a wall socket, and turning the switch on to watch the diode blow out as a schoolboy.
- KMag 13y agoOr, they could have used electromagnets for the stator and the rotor. The stator would reverse polarity at the same moment the rotor reversed polarity (modulo differences the transfer functions), so the force would still be in the same direction, despite the alternating current. One could make A/C motors this way, it's just that A/C induction motors are much more efficient.