5 ms·
Looking forward to the explosion of 3D printers that can use some kind of liquid metal, and then make metal stuff.
by mtgx 13y ago
Looking forward to the explosion of 3D printers that can use some kind of liquid metal, and then make metal stuff.
- ChuckMcM 13y agoWell then, your wait is nearly over. Although it isn't liquid metal, its powdered metal. Laser sintering is a process whereby you take a material in powdered form, lay down a layer, and then have a laser heat it to malting at specific places (that is the sintering part). Then you lower and the platform and repeat. There was a hobbyist sugar sintering printer which used a heated element to fuse sugar. Not as sturdy as metal but you can eat it :-). Given the explosion of cheap Chinese made laser cutters on Ebay I'm sure they will be all over this new market. Most of the parts already exist in the form of a laser cutter anyway.
- WestCoastJustin 13y agoThere is a YouTube video of "3D Printing of Liquid Metals at Room Temperature" [1], posted about a month ago. There is even a paper on the topic called "3D Printing of Free Standing Liquid Metal Microstructures" [2]. It will be pretty cool when this can be used for printing electronics amongst other things! [1] http://www.youtube.com/watch?v=ql3pXn8-sHA http://www.youtube.com/watch?v=ql3pXn8-sHA [2] http://onlinelibrary.wiley.com/doi/10.1002/adma.201301400/abstract http://onlinelibrary.wiley.com/doi/10.1002/adma.201301400/ab...
- sliverstorm 13y agoWill these techniques allow for the eventual control over things like grain and annealing, or is this technique always going to be limited to the very basics of metal deposition?
- msds 13y agoThat exact technique? Not in the least - it relies on indium/gallium/tin/whatever alloys that are liquid at room temperature and immediately form thick oxide skins on contact with air. Even when solidified, they'll have mechanical properties resembling wet toilet paper! SLS/DMLS, however, can give quite a bit of control over the grain structure. The solidification rate of the melt-pool is generally very rapid, giving small and homogeneous grain structure, but there can be all sorts of problems with residual stresses in the part.
- jotux 13y agoThere are commercially available printers that do metal printing. http://www.exone.com/materialization/what-is-digital-part-materialization/metal http://www.exone.com/materialization/what-is-digital-part-ma...
- spyder 13y agoLaser sintering is already used for metal printing by melting metal powder. http://www.youtube.com/watch?v=PHaXX2OoOs4 http://www.youtube.com/watch?v=PHaXX2OoOs4
- hdivider 13y agoCompletely with you on this =) I'm a bit of a 'metal-fanatic' - I think lots of everyday objects should really be made from some suitable metal, simply because that would make them last much longer. And sometimes thicker metal, too: I can't keep track of the number of times I've seen a metal thing break just because it was a bit too thin. A 0.5mm increase in thickness can make a substantial difference when we're talking about metal. There's an aesthetic barrier, of course, since lots of people prefer more 'natural' materials, but I bet reliability-focused people won't mind. (Of course, if the general user ever gets their hands on this, there would have to be very clear guidelines on things that definitely shouldn't be made from metal - e.g. obvious stuff like items you intend to shove into a microwave. There's the problem of unintentionally dangerous things (not just intentionally dangerous things like guns) coming out of 3D printers, especially metal-based ones.) (Also, a huge question is what kind of metal, since there's obviously massive variation there.)