5 ms·
Unfortunately, this article includes pretty much everything but how the NSA taps fiber at the bottom of the ocean. I'm actually a bit curious about this myself
by beloch 13y ago
Unfortunately, this article includes pretty much everything but how the NSA taps fiber at the bottom of the ocean. I'm actually a bit curious about this myself...
If you want to tap a classical signal traveling down a fiber, you want to turn that fiber into a beam splitter. A beam splitter probabilistically reroutes photons from the data stream down a different fiber. Since a single bit traveling down a fiber optic cable is represented by millions of photons in an identical optical state and fiber-optic lines are lossy, a few won't be missed. A 99/1 splitter (i.e. 99% one way, 1% the other) would be pretty hard to detect in a fiber optic line that is subject to fluctuating loss caused by bending, temperature change, etc..
The trick, according to this article, is to avoid cutting the fiber and splicing in a beam splitter. This is because, immediately after the fiber goes dark, the company running it will want to know where the fault is and hook up an OTDR to the line. In the simplest terms possible, this is a device that sends light down the fiber and looks at what gets reflected back. Any break in the fiber will reflect light back the way it came. Time how long the round-trip takes and you can pinpoint where the break is and send out a repair crew. If the operators are fast this can take mere seconds to do. Naturally, the NSA doesn't want repair crews finding their tap-in points!
So how do you turn a piece of fiber into a beam-splitter without cutting and splicing? Well, that's surprisingly easy. One way to create a fiber beam splitter is to take two fibers and fusion-combine them. Basically, you put them right next to each other and heat them up so that they melt together just a little bit. If you did this to a line in service it would never have to be cut. This is dead easy to do... to one fiber... in a lab. Doing it to a bundle of fibers in the deep sea is challenging! However, it's certainly feasible. Given that the NSA's budget dwarfs the entire scientific research budget of many nations, it's reasonable to expect they could get pretty good at it given a couple of decades.
They probably aren't doing this. I've done a little in free-space optics, but fiber really isn't in my bailiwick. There are probably other, much easier ways. However, based on a few minutes of thought I'm convinced the claims of the article are beyond merely feasible. I'd be shocked if the NSA, and every other nation out there with subs, doesn't have the same capability.
The real trick, of course, is getting the data back home (and processing it). The article suggests that the Jimmy Carter has the ability to lay fiber lines, presumably to take their purloined bits back to the nearest NSA processing center. The amplifiers spoken of are unlikely to be used to boost the signal that continues on the original fiber back to the people being spied upon, simply because a good method of tapping in should be indistinguishable from fiber loss, plus components like amplifiers spliced into the line are detectable! No, those amplifiers are likely there to boost the signal going down the NSA's pirate lines. What I don't understand is how the NSA keeps their lines from being detected. Wouldn't, for example, Russia patrol it's fiber back-bones (while tapping other nations fiber) and cut the NSA's lines? There may very well be an underwater struggle going on day-to-day that we're entirely unaware of!
- madaxe 13y agoI'd wager they've a dinky device that snaps onto a fibre (once it's unshielded), bends it a few degrees just enough that it leaks light ever so slightly, and have a photodiode within the device to amplify and relay the intercepted light down a parasite.
- beloch 13y agoAh... You sound like you know a bit! This method does indeed sound easier to pull off. Do you know how much loss you'd have to create before the fiber was bent enough to provide sufficient signal to the photodiode?
- ceph_ 13y agoI assume you're referring to the shielding seen here. http://patentimages.storage.googleapis.com/pages/US4974926-1.png http://patentimages.storage.googleapis.com/pages/US4974926-1... There's no way you're getting through that without it being service affecting. Even once you get through the layers of protective sheathing, and around the copper power lines that provide power to the undersea amps, you're suggesting that they fully remove the reflective sheathing to bend the fiber and tap off light? That is absolutely ludicrous. The process would introduce much more span attenuation than splicing in a 50/50 fiber tap (which is 3db). Are you doing this to every fiber in the bundle, you'll need at least two tapped to get bi-directional communication. It's simply unfeasible.
- BrandonMarc 13y ago> It's simply unfeasible. The NSA loves when people think this thought.
- madaxe 13y agoAlright, you tell me how you do it then.
- xlevus 13y agoI'd wager it's even simpler than that. At some point the signal must a) be converted from electrical to optical b) be boosted down the wire c) be converted from optical to electrical Easiest solution? Tap in at A, B or C. Who's going to notice that your repeater at the bottom of the ocean actually has a NSA listener plugged into its debug socket?