9 ms·
15-year-old girl invents flashlight powered by the heat of your hand
- Architech0 13y agoSounds similar to the fiber optic cable material found @ Roswell, NM. 1947...
- krapp 13y agoExcept the flashlight actually exists.
- mbell 13y agoLooks like she's just using the Peltier effect to power some LEDs. I doubt the flashlights would work well, if at all, at room temperature but would be useful in a cold climate.
- ultimoo 13y agoI'm not sure how it works but would having a small recess of water inside the flashlight help maintain the temperature difference? So that when you have used the flashlight enough that its temperature has risen to that of your hand, you can fill it up with water or ice and it'll cool down a little.
- eksith 13y agoYes, that's essentially the functionality of the flashlight, which makes it no less remarkable an accomplishment for someone her age. I don't care about the use case or whether it works well. I care that it exists.
- lotharbot 13y ago> " I doubt the flashlights would work well, if at all, at room temperature" I found it a bit disappointing that they mentioned one use case as finding candles when the power is out, shortly after mentioning that it works only marginally at 50 degrees F. It takes quite a while for a normally-heated house to drop to that temperature. It's a neat invention, no doubt, but the practical use cases for this particular version are going to be outdoors.
- ISL 13y agoIf the exhaust from a candle (think small, like a tea light) can be made to travel upward through the tube, and the exterior of the flashlight given sufficient heatsinking, it's possible that this arrangement can yield more visible light than the candle can produce. I'd have to work through numbers to guess, and do the experiment to be sure...
- schiffern 13y agoHere's the productized version of that idea: http://www.thepowerpot.com/ http://www.thepowerpot.com/ The consensus of the camping community seems to be that it's not worth it. Batteries + camping stove is easier/cheaper.
- ChuckMcM 13y agoWell the article does say that it works ok at 41 degrees and kinda sorta at 50 degrees. As with most things, its level of impressiveness varies with your understanding of the physics involved. The interesting question for a science fair would be to see what she had learned of the science. Did she evaluate the efficiency of the Peltier device? (typically single digit percentages) Did she compute the amount of work you could do with different energy differentials? Coming up with the total joules available, versus the joules harvested? Did she look at the efficiency of the LED to convert energy into light. What is its lumens per joule rating, and given the choices did she look at single color light (say red) versus broad spectrum light via a 'white' LED (which is a UV led exciting phosphors to get different colors). Did she go over the various enhancement strategies (drop an ice cube in a hollow tube inside the light?). And most importantly, given what she has learned about how one can convert a temperature differential into work, what other problems might she solve with that principle? It is unfortunate that ExtremeTech goes for the link baitey angle "ooh a flashlight that works off body heat" and less on the "Hey if we teach kids real science, they can do stuff!" (which in my opinion is a better angle on the story).
- kondor6c 13y agoIt's a great idea and a great science project, I just don't see how practical it would be due to how little light it would produce. Even if I kept it in the back of my car to aid in a possible road repair (perfect situation for a no battery device) I don't know how effective it would be. Perhaps that's just the skeptic in me?
- wensing 13y agoMaybe we could just be happy for the kid and imagine what she could be making at 25?
- hamburglar 13y agoI think a lot of people react to the sensationalism of the headlines on stories like this. It's absolutely wonderful that a 15 year old girl is interested in experimenting with little bits of tech like this, and I'm sure she's way ahead of the curve, but the news outlets like to portray this as "15 year old kid invents a new solution to a difficult problem," which is just way overstating it in the annoying style of people who are overly impressed by their own grandchildren's science projects. Just from the headline, I said to myself, "sounds like some kid discovered peltier junctions and LEDs and the media decided to act like she's invented something," which was exactly right. Good for her, she's learning and experimenting, and that's a great thing, but let's not get carried away with our portrayal of how amazing it is. Think back a month or so to the girl who "invented" a new way of charging cellphones in 30 seconds using capacitors. The sensationalism of that story was so over the top, I had non-technical people sharing the story with me on Facebook with breathless comments about what a genius this kid was and looking forward to this fantastic tech being available in all of our cell phones. Was it anything like that? No. It was a kid experimenting with well-understood technology and learning how things work, and there was no discovery or invention of anything non-obvious to any actual engineer. I don't want to detract from her industriousness or enthusiasm for learning, but when half the world is convinced she's done something notable enough to get her on the talk show circuit, something is wrong with the reporting.
- 13y ago
- bobsy 13y agoAs someone with poor circulaton to the extremities I fear I would be walking around in the dark holding the flash light with cold hands. Its a really nice idea though. Its stories like this that make me wish i paid a bit more attention in science when i was younger.
- koudelka 13y agoIf your extremities' temperature is cooler than the ambient temperature, maybe all you need is a version with the heat-collection plates flipped?
- schiffern 13y agoIf your extremities' temperature is cooler than the ambient temperature, how did you do that? Heat pumps in your arms? ;) It would be trivial to put some circuitry in there to rectify the voltage so it works in either direction. No separate version required. (changing ambient temperature is the obvious answer to my joke, btw)
- chinpokomon 13y agoAlthough others that have responded to this thread have far more experience, I believe Peltiers are optimized to work in one direction. That is to say there is a hot and cold side, so I'm not sure it is as simple as adding an inverter. Not that you'd likely be using your hands as a heat sync anyway. Yes, I realize this was meant as a joke, but I'm still curious if current can be reversed by just changing the gradient. Does it still work but maybe it is less efficient? Is there no difference at all?
- schiffern 13y agoAh, good point. I hadn't considered that. It looks like you are correct! You might sandwich two Seebeck-Peltier devices and switch between them, though. https://en.wikipedia.org/wiki/Thermoelectric_effect https://en.wikipedia.org/wiki/Thermoelectric_effect
- juandopazo 13y agoI guess this is a consequence of the development of the LED. LEDs being so efficient allows for very low power sources and a thermocouple seems to be enough to light them. Pretty cool!
- deleted 13y ago[deleted]
- pocketstar 13y agoWow, her dad is my coworker and I heard this casually mentioned at work the other day that his daughter was working with Peltiers and I should consult with her because I am also working with Peltiers for characterization of phase change materials. Also note, calling the device a Peltier is a misnomer, her flashlight is a thermoelectric device utilizing the Seebeck Effect, similar but opposite to the Peltier Effect. Peltier has just become the connotation for thermoelectric devices. The Seebeck effect only works with a temperature gradient, the flashlight will begin to heat up when held and the Peltier will produce less power. The next step is to add a heat sink and fan to maintain a temperature gradient for operation longer than 20mins.
- deleted 13y ago[deleted]
- schiffern 13y agoWow, an encouraging comment on HN? Not assuming they're a moron?!?! You give me hope for this place. Speaking of phase-change materials, why not fill the flashlight with them? It still wouldn't be steady-state of course, but I envision the fan eating up all the power. Heat pipes might help, but they still leave the problem of heat rejection. Evaporative cooling pad?
- ChuckMcM 13y agoParaffin would be a good choice, although just putting a slug of copper into it and storing it in the freezer would probably work just as well. Of course you have to be able to find your freezer in the dark ...
- schiffern 13y agoHeck, ice would be pretty good, and would maintain a large ∆T until it melted. Copper's a great conductor, but the specific heat is pretty poor: http://hyperphysics.phy-astr.gsu.edu/hbase/tables/sphtt.html http://hyperphysics.phy-astr.gsu.edu/hbase/tables/sphtt.html I guess it also depends on the relative importance of mass vs. volume optimization.
- qwerta 13y agoDid you read the comments under the article? I usually do not buy sexism in tech, but this got me.
- alanchavez 13y agoI came here to see if anyone else noticed the sexists comments under the article, what a shame. However it's not difficult to find sexists pricks in tech.
- atondwal 13y agoYou're probably just the only two who read the comments...
- alanchavez 13y agoI think the comments were removed, but one of them said that she should build a body-powered vibrator and she would be millionaire.
- tekromancr 13y ago>However it's not difficult to find sexists pricks in tech. Or online, or in public.
- masklinn 13y ago> Did you read the comments under the article? It usually isn't a good idea. > I usually do not buy sexism in tech So I guess you don't "buy" it because you don't usually see it, if only on account of not being on the receiving end of it?
- ISL 13y agoVery clever! I'll state for the purposes of prior art that, if you can get enough power to add a little fan or other air-moving mechanism to the circuit to pull air through the tube/heatsink, it will operate in still air for as long as a human can keep it warm. This opens the mind to a realm of interesting body-powered devices, especially in environments where heat sinking is easy, like for divers, motorcycle riders, and sailors. Want a wetsuit or jacket that lights up or operates sensors on its own? Easy peasy.
- solistice 13y agoUnless you are planning on keeping warm in those environments, which would make strapping heat sinks all over your body a bad idea.
- MojoJolo 13y agoCan this technology work in an airconditioned room? I was thinking if this technology can provide enough electricity to even just lighting up a single room. It can use the heat outside, and the cool air (form air condition) inside the room. All in all, very good invention! And also inspiring. I hope more teens will be involve in inventing things. I hope she wins. Also, (totally unrelated) I think she's cute. :)
- relix 13y agoSorry, what you're talking about is a perpetual motion machine, which the laws of thermodynamics forbid. The AC will just have to work harder to get the extra heat added by the thermoelectric device back out, no free energy here.
- ISL 13y agoIt should be provable that thermodynamics guarantees that it will be more power-efficient to generate the light directly with electricity instead of using electricity to cool the room, then exploiting a thermal gradient with even a lossless Peltier element.
- tekromancr 13y agoTrue, and it is. However, if you are going to be using that energy to cool the room anyway, why not try to reclaim that 'spent' energy?
- samsquire 13y agoI can't help thinking of a full body suit to harvest the entire heat output of the human body. Maybe you could use assisted sweat evaporation to provide for the cold tile? It could be like a Fremen suit so they can pump the water coolant around and potentially and power electronics.
- mistercow 13y agoI'm pretty sure the result of that would be that you would overheat as the suit would prevent you from dissipating heat quickly enough.
- chockablock 13y agoI think the risk is that you'd have the opposite problem: hypothermia.
- mistercow 13y agoI'm a little shaky on the thermodynamics of peltiers, but it seems (and I swear I read something years ago to back this up) that if it extracts power from the equalization of a heat differential, it must also slow down the conduction of heat. Two arguments for why this should be the case: 1. If it were not the case, then assuming ideal peltiers, you should be able to simply stack one peltier after another and get more energy than just one from the same temperature differential. And that's clearly crazy talk. If peltiers do not impede heat conduction, they must have some other limitation that prevents this from being the case. 2. Peltiers are reversible; a thermoelectric generator also acts as a thermoelectric cooler if you put current through it. So when you heat one side of the peltier and cool the other, generating a current, then that current should cause it to simultaneously act as a TEC (analogously to how counter-EMF causes an electromagnetic generator to resist as you turn it, essentially by turning it into a motor trying to turn in the opposite direction). That is, the very current you are generating will cause the peltier to transfer heat from the cold side to the hot side, with the end result that it would act as an insulator. Edit: However, if I'm right about this, then assuming you can have efficient and flexible peltiers, it should work quite well for winter clothing.
- Qantourisc 13y agoNot to complain, but how much light does it really produce ? Cause this would be very neat ... but I still need to be able to light the room :)
- fjarlq 13y agoFrom her project description[1]: My objective in my project was to create a flashlight that runs solely on the heat of the human hand. Using four Peltier tiles and the temperature difference between the palm of the hand and ambient air, I designed a flashlight that provides bright light without batteries or moving parts. My design is ergonomic, thermodynamically efficient, and only needs a five degree temperature difference to work and produce up to 5.4 mW at 5 foot candles of brightness. 5 foot candles is about 54 lux. 30 to 50 lux is minimal illuminance for reading. [1] http://www.googlesciencefair.com/en/projects/ahJzfnNjaWVuY2VmYWlyLTIwMTJyRAsSC1Byb2plY3RTaXRlIjNhaEp6Zm5OamFXVnVZMlZtWVdseUxUSXdNVEp5RUFzU0IxQnliMnBsWTNRWXA2ZVVBZ3cM http://www.googlesciencefair.com/en/projects/ahJzfnNjaWVuY2V...
- Qantourisc 13y agoThanks
- kailuowang 13y agoThere is an old Chinese saying: I wish she was my daughter.
- dsrguru 13y agoJust out of curiosity, what's the Chinese expression? Is it a 成語?
- gdonelli 13y agoShe is more eloquent and capable of public speaking that a lot of adults. More women should see example like these, it is a great example of woman in engineering kicking ass.
- phy6 13y agoShe should call it the Fleshlight
- Kiro 13y agoGoogle 'fleshlight' and I'm sure you'll agree it would be a pretty bad choice of name.
- asdfologist 13y agowhoosh
- lostlogin 13y agoIt says that in the comments below the article.
- nessus42 13y agoFirst I have to say that this is very cool indeed! Practically speaking, however, I'm not sure that it would have any advantages over the flashlights that you crank for a while. Though perhaps those crank flashlights use a rechargeable battery that degrades over time, and this new flashlight would have a longer shelf-life? Though I should think a good capacitor instead of a battery would solve that potential problem with the crank flashlights.
- ht_th 13y agoThose crank-powered flashlights make a lot of noise and induce cramps in the hand used to crank it.
- iknight 13y agoIt seems to work well for me. My son loves his. Granted I don't use it as a necessity.
- maxerickson 13y agoJunk like this: http://dx.com/c/flashlights-lasers-999/led-flashlights-901/aa-flashlights-931 http://dx.com/c/flashlights-lasers-999/led-flashlights-901/a... will make quite a lot of light using a single NIMH AA that has been out of a charger for weeks (pushing ~ 1 volt...). It doesn't get you to 0 batteries, but it does a nice job of making light when you happen to realize you need it (without thinking about it in the interim).
- fps 13y agoI've never had one of those crank flashlights work after more than a few hours of use. I bought several for my kids, and they didn't even make it through a weekend camping trip. I also tried keeping one in my car, and found that the second or third time I tried to use it, it would light up dimly for a few seconds after several minutes of cranking. Some component, either the capacitor or the generator, has a very high failure rate.
- skriticos2 13y agoSo if she is using the power of the human body to power a flashlight when she is 15, does that mean she'll design the technical foundation of the Matrix when she is 30? (which had the purpose to harvest the human energy) Sorry, could not resist. Great to see our youth being creative.
- twodayslate 13y agoPut this in phones to charge them when you aren't using it?
- jff 13y agoWon't work very long, it operates using the temperature differential between your hand and the interior of the flashlight. Which, based on the quoted "still worked at 50 degrees F", means you'd have to stick your phone in the fridge when you're not using it. And then take it out so it can charge just a little bit before the temperature equalizes.
- bentcorner 13y agoAlternative, could you use this to capture waste heat from the phone internals?
- Anonymous238 13y agoInvented is a strong word when these already exist. http://www.youtube.com/watch?v=pFqrx2-ENgE http://www.youtube.com/watch?v=pFqrx2-ENgE
- theoj 13y agoInteresting. More info here: http://thermalforce.de/de/product/module/index.php http://thermalforce.de/de/product/module/index.php http://thermalforce.de/de/download/m101.pdf http://thermalforce.de/de/download/m101.pdf ThermalForce says price is available upon request -- so it may be available for sale as a custom order. There are some other interesting products at that first link as well.
- sliverstorm 13y agoYou don't have to be the first one to invent something, to invent it. It doesn't suddenly become imitation if you came up with it on your own.
- zerr 13y agoOf course, but with nowadays available information and possibilities to search, it is quite easy to find that it is already done. I mean, I don't think she invented it being sitting in some cave, without contact to outside world. She would at least need to have done some simple research, with the materials and etc... So some organic results would pop up.
- kirchhoff 13y agoReminded me of the Seiko Thermic, a wristwatch powered on the same principle.
- deleted 13y ago[deleted]
- deleted 13y ago[deleted]
- rikkipitt 13y agoBlean (n.) Scientific measure of luminosity : 1 glimmer = 100,000 bleans. Usherettes' torches are designed to produce between 2.5 and 4 bleans, enabling them to assist you in falling downstairs, treading on people or putting your hand into a Neapolitan tub when reaching for change. ~ Douglas Adams and John Lloyd
- Ellipsis753 13y agoMy favourite part of the article was: "The flashlight maintained a sufficient level of light for over 20 minutes, definitely enough time to find the candles in the dark when the power goes out." Why not just put the candles where the flashlight was in the first place? (or just put a reliable battery powered flashlight there.) It sounds like it's saying "this flashlight should last long enough for you to find your better flashlight".
- hcarvalhoalves 13y agoWay to go. Good to see a girl that age interested in science and engineering.
- circuiter 13y agoFor anyone interested, here's the list of all the finalists this year - most of them much more impressive. http://www.businessinsider.com/2013-google-science-fair-finalists-2013-6?op=1 http://www.businessinsider.com/2013-google-science-fair-fina...
- stormbrew 13y agoShe should be using blue LEDs. I swear those things can send light through a wall.
- vidarh 13y agoI bought a pack of 400 little round black stickers only for the purpose of covering blue leds... For most of the devices I have with blue leds it takes 2-3 stickers on top of each others to dim them enough for me to still see them but not feel blinded when the light in the room is dimmed..
- alexhawdon 13y agoThey certainly are bright, but the light is a terrible colour for us humans. An Optician friend explained to me that the shorter wavelength of blue light causes it to focus in front of the retina, which is why blue LEDs appear out of focus when you look at them.