3 ms·
Can't do this for traffic waves, but it would appear the ideal solution to merge slowdowns is to have different speed limits before and after the merge. Regard
by tempestn 13y ago
Can't do this for traffic waves, but it would appear the ideal solution to merge slowdowns is to have different speed limits before and after the merge. Regardless of anything else, the flow rate before and after a merge must be the same. Ideally you want the flow rate after the merge to be approximately one car every 2.5 seconds, with those cars traveling at the speed limit. (As opposed to the usual situation where post-merge traffic accelerates from a near stop, causing large, unnecessary spaces to form.) One way to achieve this is to have pre-merge traffic leave twice the space, but it's unlikely there are enough traffic-flow vigilantes out there to achieve that, if such a thing would even be desirable. Much easier is to keep the same time spacing between cars, but to have pre-merge traffic travel at half the speed. Traffic approaches the merge in two lanes, traveling at 50 km/h. The speed limit increases to 100 km/h, then immediately afterward the traffic merges. Speeding up from 50 to 100 naturally opens spaces, and traffic merges painlessly. There is no reason for a slowdown to occur, so no self-perpetuating gridlock.
Of course, the slower speed limit is only useful when the road is filled to capacity; otherwise it would be inefficient. So for most roads you would want this limit to vary based on time of day (or even dynamically based on traffic volume, but obviously that would only be useful/necessary in extreme cases).