2 ms·
There are aspects of the whole technology that were avoided in the article, or edited out for length, or whatever. Regardless of reason, here's some filled in
by VLM 13y ago
There are aspects of the whole technology that were avoided in the article, or edited out for length, or whatever. Regardless of reason, here's some filled in blind spots:
One important ignored aspect is you can treat the FPGA as a magic universal microcontroller. Oh, you need 3 UARTs now, I'll INCLUDE another at a different I/O addrs. And you'd like a CANbus now? No problemo in 10 minutes you'll be programming on the same hardware now with a CANbus. Oh you don't want to use a Z80 anymore, fine I'll compile the FPGA to be some pic variant in 5 minutes, or a microblaze, or whatever you want as a CPU core. As long as you slowly successively approximate real available microcontroller hardware, you can ease the eventual port off the FPGA to some microcontroller hardware that costs $1.50 in qty instead of $15.00 in qty. Its a lot easier, faster, and cheaper to upload a bitstream to a FPGA than to solder in a different microcontroller hardware. This makes device selection during development much less critical/scary. You don't have to sit in paralysis wondering if you need 3 or 4 I2C busses.
Another thing is not mentioning the open development community. Most HN readers probably hang out at github. The place where most FPGA folks hang out is opencores.org. People who exclusively hang out on github are going to wonder why "no one" is using FPGAs and theres "nothing out there" and "not much activity". Well come on over to opencores and you'll get more than a lifetime of entertainment ahead of you, for free... Its like going to CPAN and hanging out with CPAN people and wondering why "no one" uses Python. Looking in wrong spot. Need a more target rich environment.
You can do a lot of "stuff" with FPGAs as the underlying technology without doing much of anything with HDLs. Much as I once programmed on a Silicon on Sapphire CPU a long time ago, but the underlying technology simply didn't matter at the assembly language level. I'm sure it was very exciting on the factory floor and in the R+D labs, but I wasn't there, so I didn't much care. In a similar way you can synth up a perfectly good 6502 and give it twenty semi-intelligent ethernet interfaces without too much HDL effort and then just do your "software thing" on the synthesized device without touching the HDL.
Tying it all together, you'll get people outside the community reinventing the wheel, trying to slowly and methodically invent the concept, purpose, and implementation of the WISHBONE interconnect bus standard or something like that. Well, all that stuff got figured out and implemented inside the community like a decade ago, so... Much like the old saying about people refusing to use unix inevitably end up poorly reimplementing it.