4 ms·
The biggest problem is they don't store enough energy. Or in other words, they don't store enough per how much they cost. The energy capacity goes up linearly
by ars 13y ago
The biggest problem is they don't store enough energy. Or in other words, they don't store enough per how much they cost.
The energy capacity goes up linearly by mass, but goes up by the speed squared. So all the effort has gone toward increasing the speed.
But the trouble is that the force on the flywheel also goes up by the speed squared. The only materials strong enough are wound carbon fibers - and they are very very costly.
If you increase the mass instead you need very very large and strong bearings, and they tend to fail. For high speed, low weight, you barely need any bearing at all - magnetic bearings are preferred if you can manage it.
- contingencies 13y agoThanks for your summary. The kickstarter project was targeting 15kWh which should be more than enough for a low draw residential setting. For a one-off prototype, they asked for US$50,000 funding. Let's guestimate that with mass-manufacturing the same product could be built for US$30k, and that's going to provide a probable rated lifespan of around 20 years with zero maintenance. Contrast batteries, which might cost 30% of that (random figure taken from a solar site) but only last 3-6 years. Sure, they are portable, but they are horrible for the environment and a pain to replace. I still see a huge market for these. See also a 1979 presentation from an MIT guy: http://adsabs.harvard.edu/abs/1979STIN...8010639M http://adsabs.harvard.edu/abs/1979STIN...8010639M Technical and economic performance analyses indicate that, contrary to general thought, a flywheel system will be competitive if not superior to more conventional systems utilizing either present day or advanced batteries. This derives from the ability of the flywheel to perform the functions of dc-to-ac inversion and optimal impedance matching between the PV arrays and the load in addition to providing energy storage.
- ars 13y ago> This derives from the ability of the flywheel to perform the functions of dc-to-ac inversion and optimal impedance matching between the PV arrays and the load in addition to providing energy storage. We don't need this anymore. This stuff is easy with modern power electronics, so if this is what makes it competitive, then it's not. I also suspect the reliability is not there yet for 20 year operation. And it's not like people haven't tried - I've read about a large number of companies that have tried, and yet they all seem to vanish.
- contingencies 13y ago> We don't need this anymore My understanding is that AC/DC conversion is lossy and rule of thumb figures online quote 10-15%. > I also suspect the reliability is not there yet for 20 year operation. A lot of products already on the market have 20 years lifespans quoted, eg. Socomec FLYWHEEL, Vycon. > I've read about a large number of companies that have tried, and yet they all seem to vanish. Sources? I am genuinely curious.
- ars 13y ago> My understanding is that AC/DC conversion is lossy We don't need to do this all that often, and the flywheel is lossy too. And you can get 96% efficient power supplies http://en.wikipedia.org/wiki/80_PLUS http://en.wikipedia.org/wiki/80_PLUS Plus you can use http://en.wikipedia.org/wiki/Rotary_converter http://en.wikipedia.org/wiki/Rotary_converter and http://en.wikipedia.org/wiki/Motor-generator http://en.wikipedia.org/wiki/Motor-generator which are basically the same thing, minus the energy storage part. > A lot of products already on the market have 20 years lifespans quoted, eg. Socomec FLYWHEEL, Vycon. This could be new - I haven't been following this recently. > Sources? When people first started focusing on automobile energy efficiency flywheels were the thing. They eventually gave up and switched to hybrids, and/or batteries. Note the date: http://www.nytimes.com/1994/06/22/business/flywheels-to-power-vehicles.html http://www.nytimes.com/1994/06/22/business/flywheels-to-powe... I don't really have any links from stories from years ago, but this one is high profile and recent: http://www.washingtontimes.com/news/2012/apr/9/feds-call-bankrupt-solar-firm-an-empty-shell/ http://www.washingtontimes.com/news/2012/apr/9/feds-call-ban... The stores would have a pattern: Some young new company proudly showing off its new technology to the fawning journalist - and then that would be the last you would ever hear of them. (Someone once told me to put their names in a google news alert then forget about it - most of the alerts would never trigger a second time.)
- contingencies 13y ago> We don't need to do [AC/DC conversion] all that often, and the flywheel is lossy too. And you can get 96% efficient... Sure, even looking at that page 10-15% does seem a regular rule of thumb though. Many devices in the home (computers, displays, etc.) require DC. Photovoltaics produce DC, but not necessarily at a level suitable for variable, direct load by devices. So in a sustainable source powered situation, you have to pay for this loss somewhere: either in storage or inversion or both. It would seem that the 1979 author was refering to the flywheel's potential toremove the 'double tax' for storage and inversion. The listed 'motor generator' benefits (load and spike isolation, etc.) would also seem to apply. > this one is high profile and recent Beacon are often referenced. It seems they were revived and the major facility they built is still in operation. They cited a combination of DOE policy and 'the current political environment' as their cause of temporary bankruptcy.