2 ms·
You're implying it could be done if whatever load distribution and power condition that's done outside of the chip, which consists of a lot of analog components
by astrodust 14y ago
You're implying it could be done if whatever load distribution and power condition that's done outside of the chip, which consists of a lot of analog components to help manage rapid changes in power consumption, could be somehow packaged inside the chip.
So, in rough terms, the internals of a large-scale chip are not one big integrated circuit, but a large number of smaller modules that are massively interconnected, then?
That rule of thumb seems to apply to only a particular class of chips. Wouldn't the number of pins be somehow proportional to the power draw, as at higher currents induction would become a more severe problem? It's just usually the case that more power-hungry chips have more pins, as the 2011 socket is for Intel's flagship CPUs, the 1155 ones more commodity-oriented.
With the power voltage dropping below ground, that unless you had a floating ground, that'd be implying reverse flow of current, negative voltage, right? Or are you talking about a non-zero voltage ground? I'm not sure what the presumption is in real-world CPU design.
- elwin 14y ago> That rule of thumb seems to apply to only a particular class of chips. Wouldn't the number of pins be somehow proportional to the power draw, as at higher currents induction would become a more severe problem? I think it depends on the chip's speed. The problem is with rapid changes in current. Of course, higher currents can also have higher fluctuations. > With the power voltage dropping below ground, that unless you had a floating ground, that'd be implying reverse flow of current, negative voltage, right? Or are you talking about a non-zero voltage ground? Suppose the board's ground rail is 0 V and the power rail is at 12 V. The chip's ground voltage might bounce up to 9 and its power down to 8. It does cause reverse currents and other bad effects.
- astrodust 14y agoAh, so the ground gets pulled up and the power driven down. Thanks. This makes a lot more sense. I never thought Intel was doing something for no reason, but the reasoning wasn't obvious.