4 ms·
The more complicated reasons aside for the moment, thunderbolt is more or less like an external PCI express connector (with some added goodness). As a result yo
by smalley 14y ago
The more complicated reasons aside for the moment, thunderbolt is more or less like an external PCI express connector (with some added goodness). As a result you can access a lot of things via thunderbolt you probably wouldn't want outwardly accessible (imagine a network where anybody could do a DMA on demand). Then there are a number of other things, for example the protocol and phy not being designed for 100 meter cable runs like Ethernet, no low level networking support, the fact we have a reasonable and ubiquitous interconnect for networks already.
There are alternatives for super high speed interconnects within a data center though (think infiniband and cousins) or high bandwidth options for longer distances (like fiber) etc.
- vidarh 14y agoInfiniband and 10Gb ethernet are both ludicrously expensive steps up from gigabit ethernet which is what makes people look for alternatives everywhere. Back in the day there were people doing IP over (P)ATA and SCSI for similar reasons... Cable length is not necessarily a big deal - for a lot of applications the appeal would be to use it as an interconnect between servers in the same rack.
- rdl 14y ago10GE and Infiniband are actually not that expensive for HBAs now. Just expensive for switches, but not that expensive, and would be just as expensive for any other non-blocking switch with that level of bandwidth. Juniper EX4500 is probably the cheapest right now, at around $20k for 40 port. $500/HBA and $500/switch port is cheaper than GE was at the same point in its adoption cycle, I think. Might even be half that with discounts. Aggregated GE is still cheaper and makes more sense for servers in most cases, though.