4 ms·
This is huge if only because a LED bulb company finally put its warranty where its mouth is. Every other bulb, ie. the expensive Phillips bulb, only gives a 3-
by ck2 14y ago
This is huge if only because a LED bulb company finally put its warranty where its mouth is.
Every other bulb, ie. the expensive Phillips bulb, only gives a 3-4 year warranty
I'd definitely give this a try @ $10
It's also dimmer compatible which is a big plus for me with X10 control, CFL cannot dim.
If this bulb does not operate for 10 years (based on 6 hours per day / 7 days per week of normal consumer use) from date of purchase when used as directed, return the bulb [...] Cree will send you a replacement or at Cree’s option refund the original purchase price.
ps. you can use ebates.com to get a $5 off $50 Home Depot coupon and 3% cashback which will reduce the cost on these
- mullr 14y agoI wonder what the expected warrantee redemption rate is for these things, for all of them that fail. Say you had it for 5 years and it failed. If it was me, I'd just go out and buy another one. Perhaps a different brand, but I probably wouldn't think that far ahead. For something at this price point, does anybody really USE the warrantee?
- ck2 14y agoFor $10, I would return it for the next ten years. Problem is it costs $1.70 to send via USPS mail, but maybe you could wait until you had a couple to send back.
- Cthulhu_ 14y agoAnd that's exactly where they're going here; offer a long warranty and easy returns, while producing a product that's cheap enough (definitely in 5 - 10 years) that people won't actually bother with it. It's what happens with mainstream consumer electronics; 3 years warranty, sure, but would you return a $30 machine to the webshop you got it the cheapest to claim that three years later?
- ghshephard 14y agoI know some people who write the date on their light bulbs (incandescent, no less) and switch brands if the bulbs burn out too quickly. For $10/bulb, those people would likely get their refunds, but I agree - for bulbs lasting five years, not a lot of People are going to be redeeming this warranty. The good news, is that Cree probably has a very good idea what the failure rate will be, and it's likely that the vast majority of these Lightbulbs are going to last more than 10 years.
- mc32 14y agoI agree. I bought a Sylvania and while I like it, specially the 75W equiv, it's a bit pricey ($35). I'll be on the lookout for these next time I'm at a home improvement store. Also hope they come out with 75W equivs. Love the crees in torches as well.
- dangrossman 14y agoAll LED bulbs I've seen say dimmer compatible, but most really aren't. I have comparably-priced LED bulbs from Home Depot already, and any less than 90% power they buzz loudly.
- thisone 14y agoHeh, that's completely the opposite of my experience. I've seen extremely few LED bulbs that say they are "dimmable" and I've been looking around a fair bit as I'm transferring all the lights in the house over to LED if on-time matters and CFL if it doesn't. (in UK I should note)
- ck2 14y agoAlmost all led bulbs I've tried (admittedly not the expensive ones) have failed in my dimmers.
- zokier 14y ago> It's also dimmer compatible which is a big plus for me with X10 control If you have already X10 system in place, wouldn't X10 compatibility be more ideal than dimmer compatibility?
- ck2 14y agoX10 has dimmer modules. It's basically a dimmer with remote control.
- zokier 14y agoYes, but the point was that it would be far more optimal to have the control signals go directly to the LED driver circuitry instead of chopping up the mains voltage and hoping that the LED driver will handle it. Computer analogy: Imagine you would like to adjust the performance/power of your computer. You could plug the computer to a dimmer and then engineer the computer to adjust itself according to the dimmed mains voltage. Or you could route the X10 signal to the computer and use it to adjust the power profile. Which solution seems more reasonable to you?
- nitrogen 14y agoX10 is way too slow and really needs to go away. Instead, bulbs should include a more modern standard, which Hue does (at 6x the price).
- zokier 14y agoThat is bit besides the point. Personally I think PLC based system would make most sense for home automation, considering that a large portion of the devices are mains-powered anyways. And if you design the system really cleverly then having the same network extend wirelessly to those nodes where PLC is unsuitable.
- nitrogen 14y agoPowerline control is fine, but X10 is simply too slow to handle the demands of a modern house with advanced automation. My own system uses DMX-512 and Philips Hue lights (which use Zigbee Light Link). Some of my customers use X10, but the performance is not nearly as good since it can only transmit 20 bits per second.
- unwind 14y agoApologies, but: pet peeve alert! The Dutch electronics multinational is actually called "Philips", with a single 'L' in the middle. See also http://en.wikipedia.org/wiki/Philips http://en.wikipedia.org/wiki/Philips. I often see it written with two 'L':s, I think it's mainly due to pronunciation by English speakers.
- urza 14y agoThe bulb will probably operate in 10 years, but most likely it will loose its brightness over the years, because I doubt that it can be properly cooled..