6 ms·
Stop pouring hot water down the drain
- mhb 18y agoDoesn't it make more sense to use the hot, gray shower water to heat the water going in to the hot water heater?
- jodrellblank 18y agoDoesn't it make more fun to wedge a peltier device between the outgoing warm and the incoming cold and use the generated power to light some LEDs in the shower?
- froo 18y agoI love peltiers, I used one as a heat exchanger on my brother's 944 Turbo on the induction system and transferred the heat to the fuel rail, creating a fuel warmer. Result was he set the engine management system (motec) to run the fuel system richer, as the fuel that was more ready to combust (as a result of the heat) and given the air going into the turbocharger was colder (more dense) there was more air to react. That being said - we never got the opportunity to test if there was any actual horsepower gain, but he used to suggest that there was. Now as for LED's in the shower, that might not be as silly as it sounds. Imagine if the tiles on the floor were semi transparent (I'd suggest some kind of translucent polycarbonate) and lit up like a disco floor for those people who love to sing in the shower.
- _pius 18y agoOn first blush that sounds like the way to go, but for most existing homes it would probably be suboptimal. To reduce costs, a device like this should be localized to a room rather than force you to route the water from your shower all the way back down to a water heater. The latter would necessitate a major plumbing addition.
- jwilliams 18y agoAgree - and given the locality (i.e. there is someone using heat/hotwater right there), it would make sense to use it as soon as possible. If you didn't have locality, the water heater approach probably make more sense -- i.e. Your washing machine, dishwasher, which tend to hold on to hot water and then dump it at the end of the cycle.
- mikeyur 18y agoI'd actually prefer the gray water be used to heat the floor in the bathroom. If you've ever stepped out of a shower onto a tile floor you know how cold it can be sometimes. And if you've ever stepped onto a (electrically) heated floor, you'll know how awesome it is. Running the warm water through a series of pipes below the bathroom floor would seem like a pretty good use of it to me, when compared to just dumping it into the sewer as-is. Then of course, in a green house, the gray water would be collected and used to flush the toilets.
- matthavener 18y agothere is a similar idea for high insulation homes where you heat exchange the outgoing air (recirculated for freshness) with the incoming air to avoid having to cool/heat the incoming air as much imo, heat exchangers are a good way to reduce consumption because they're usually passive and don't require much maintenance
- pingswept 18y agoThat's a great idea. Modern gas boilers and tankless water heaters often run their exhaust and intake in concentric pipes, so that the outgoing hot air warms the incoming cold air.
- jwilliams 18y agoThe one that's always confused me is having a Fridge in a cold climate. Always wondered if there was a technology that could simply couple the fridge to the outside temperature.
- pingswept 18y agoThis does exist. For industrial applications, there's http://www.freeaire.com/ http://www.freeaire.com/. There are also small fans designed for use with RV fridges that could do the same thing. Unfortunately, in a cold climate, you need to heat your house anyway. Electric heat is more expensive than natural gas or oil heat, so you might save some money, but from a greenhouse gas perspective, the savings are small at best.
- jwilliams 18y agoYeah, good point.
- furyg3 18y ago"but from a greenhouse gas perspective, the savings are small at best" Taking that argument down to an even more micro-level: most of the light in my apartment comes from overhead halogen lights (hot), and sometimes I'm inclined to switch them for energy efficient fixtures, but... I live in a cold place anyway, so I'm not sure that switching makes a lot of sense. I know it's more efficient for the central heating system to be doing the heating (and not light bulbs, refrigerators, or laptops), but I need the heat, I need the light, and my energy bill isn't that big, so why switch?
- pingswept 18y agoBecause natural gas is around 4x cheaper per joule than electricity. If your energy bill is, say, $10 per month, maybe it's not worth it. Would you buy $30 in lightbulbs to save $7.50 * 12 months * 10 years = $900 over the next ten years? If not, would you like to fund my startup?
- 18y ago
- quizbiz 18y agoNow this is value added. The key would be for housing developers to adopt this.
- ars 18y agoDup: http://news.ycombinator.com/item?id=529552 http://news.ycombinator.com/item?id=529552 And the messages there indicate this device probably isn't practical, it has too many caveats. And if you want to do this, you attach one to the main sewer stack of the whole house - it's been available for about 20 years.
- noonespecial 18y agoIf your house is older and has copper sewer piping, it does an excellent job of radiating that heat back into your house. What you save heating water might not be too far off the heat you don't have to use your furnace to make.
- lutorm 18y agoPipes generally don't go in your living spaces, they might heat your basement but that's not really where you want the heat.
- noonespecial 18y agoNearly all heat that starts in your basement ends up in your house. It has nowhere else to go. The copper pipes in our basement ran directly beneath the floor of the bedroom. A fine warm strip would develop whenever someone took a shower. By the time it got to the exit point in the house, the pipe was barely warm enough to notice. That is not negligible heat transfer considering its "free".
- pingswept 18y agoThe heat in your basement does actually have somewhere else to go. Typically, uninsulated basement walls and floor are near the temperature of the surrounding earth, which ranges between 45-55 F depending on how far down you are on the wall and your latitude. Heat conduction between basement air and those cold surfaces is not negligible on the scale of home heating.
- lutorm 18y ago
- phugoid 18y agoI usually wait a little while for the water temperature to stabilize, before getting in. That transient period will be much longer with this gadget. - time it takes for the heat exchanger (gadget) to warm up due to shower drain water. - now the shower water temperature has changed (increased), so you need to adjust the valves. - another transient time for the heat exchanger to warm up, etc. Depending on the design, you might find yourself wasting a lot more water, or jumping around in the shower as the temperature keeps changing in this slow control loop.
- eggnet 18y agoThere are shower control systems, purely mechanical, that regulate the temperature themselves. Those systems would automatically adjust to the changing temperature of the "cold" water.
- savrajsingh 18y agothis is super cool.
- blahblahblah 18y agoThe diagram shown in the article doesn't make a whole lot of sense to me. They've got the output of the heat exchanger going directly to the supply of the shower where it mixes with the output of the water heater. This actually reduces the temperature of the shower and, as phugoid already noted, introduces undesirable temperature transients. It seems to me that it makes more sense to use the heat exchanger to preheat the feed to the water heater. This has the added advantage of making the energy exchange mechanism generally applicable to any hot water that exits via the drain which supplies the heat exchanger, not just shower water. Also, when you finish your shower and shut off the water, there is still heat in the drain and still water refilling the water heater, but the design as shown does nothing productive with that energy. Of course, one would hope that the heat exchanger itself is made of highly corrosion-resistant material. It would be quite nasty to have a leaky drain introducing gray water into your potable water supply.
- extension 18y agoIt only reduces the temperature of your shower if you would otherwise be standing under 100% hot water, which would literally be lethal with a typical hot water system (I'm guessing you don't have a typical hot water system?). It's more likely you are using a mix of, say, 70% hot, 30% cold. If you use this thingy to heat the cold water, you could get the same temperature with maybe 60%/40% mix, thus using less hot water and getting a cheaper and/or longer shower.
- blahblahblah 18y agoPerhaps most people have the thermostat on their water heater set higher than it really needs to be? On the other hand, as a bachelor, I concede that my hot water usage pattern is not the same as an average household with a family of 3 to 5 people. I typically do use 100% hot water for my showers. The only exception to this is if I run the dishwasher or the washing machine a few hours before taking a shower, which will result in 100% hot water being too hot.
- ryanvm 18y agoMy cheaper version: Stand in my own filthy gray water and then leave it overnight. Problem solved. Of course now I have to solve this jock itch on my feet...
- rsheridan6 18y agoThe purported savings are comparable to what you would save by switching to tankless water heaters: http://apps1.eere.energy.gov/consumer/your_home/water_heating/index.cfm/mytopic=12820 http://apps1.eere.energy.gov/consumer/your_home/water_heatin... The tankless heater also doesn't have the energy cost of building this grey-water heat exchange device. It does have the energy cost of being built itself, but that's probably comparable to the cost of building a standard heater with a tank. Your best bet energy-wise would probably be to go with a tankless heater as near as possible to the shower, maybe combined with a hypothetical system like the one in the article, except it would warm the water going into the tankless heater. Or you could not drain your bathtub until the water cools, if you need to heat your house anyway.
- gills 18y agoThis would work well in my house, but not for the stated purpose. We have a hydronic heating system (hot water circulates through pipes to toasters...kind of like old radiators but more efficient). A heat exchanger from graywater to our heating system would help our winter gas bill quite a bit. Tying it to the dishwasher and washing machine would help out a lot too.