3 ms·
They're probably not going to test gun control as much as the press thinks. Calibrating cheap 3D printers is hard, and chances are it's going to take quite a bi
by makomk 14y ago
They're probably not going to test gun control as much as the press thinks. Calibrating cheap 3D printers is hard, and chances are it's going to take quite a bit of tweaking to print off a reliable magazine or other part on a new printer. I can easily see would-be spree killers getting stopped mid-massacre because their misprinted magazine jammed.
- nathan_long 14y agoCalibrating cheap 3D printers is hard right now. That doesn't mean it always will be. The good ones will get cheaper and the cheap ones will get better. It used to be hard to get a computer to use a new paper printer at all. Now it's almost always plug-and-play. You could imagine a 3D printer that prints test objects, scans them in great detail to find defects, and calibrates itself accordingly.
- talmand 14y agoExactly right. Computers used to be hard to build by hand years ago, you had to solder your own boards for gosh sakes. These days you buy the components off the shelf and stick them together correctly. What is hard today will most likely be easy tomorrow.
- jerf 14y agoThat's true today. Is it true in 2023? I think there's some failure of the imagination here. 3D printing as we know it today will soon be only one tool in the automated arsenal. As robotics improve and 3D printing improves, the idea of a fully automated shop that fits in a reasonable size is not silly. You say you need a lathe to really make a gun? OK, fine, I tend to agree that current 3D printing techniques will never really make you a decent barrel... but what the stopper on a robotic lathe, or other robotic tool for building barrels? There isn't one.