2 ms·
Uh, if something is milled to a metric size and tolerances in metric, it is in fact, a metric size, regardless if it happens to match some imperial sizes. Ther
by DannyBee 14y ago
Uh, if something is milled to a metric size and tolerances in metric, it is in fact, a metric size, regardless if it happens to match some imperial sizes. There is no requirement that metric sizes be only integer whole numbers, and if you are going to claim that, for example, all lumber purchases outside of the US are done to exact integer metric sizes, that's just false. It may be the construction industry purchases common sizes in MM, but that's not really the same.
If you want only integer or half integer metric sizes, that's something different than "metric sized"
That said, rough lumber outside of plywood/framing lumber is weird in both the US and Europe anyway.
Nobody is trying to hit any exact sizes of anything, except that the lumber needs to be able plane down to certain thicknesses. Grading is based on percentage of clear cutting, not on thickness or width or length. If your lumber supplier doesn't give you lumber in thicknesses that can be planed down to the right size, you get a new supplier. Same in Europe.
- jacquesm 14y agoLumber isn't 'weird' the sizes make perfect sense, if you're constructing something beyond a picknick table you'll see the logic immediately. Nobody said anything about integer whole numbers. But I can't seem to get around your mental block that the system you are working in is Imperial, not metric so I'll leave it at this.
- DannyBee 14y agoActually, the sizes are in fact, simply odd left-over relics. This is pretty well documented history about how studs came to be nominal vs actual. Same with hardwood lumber, in fact. Considering i build about 20 pieces of fine furniture a year, and have built 3 houses, all of which are things "beyond a picnic table", as well as being active in a number of the industry associations that define this stuff (in my spare time), and you apparently know more, maybe you could explain the logic to me. FWIW: I have no mental block, i actually work in both systems all the time. The whole exercise here has been pointing out your claims are wrong, not about me at all.
- 001sky 14y agoLumber isn't 'weird' the sizes make perfect sense... If you go to a home depot and ask for something 2x4x8ft, it will not be 2.00 by 4.00 inches or 8ft long, when measured with a caliper. Its weird in the sense that the stated sizes are only approximate, quite unlike hardware or fasteners, wrenches etc.
- jacquesm 14y agoThose sizes are what they are because of the way lumber is produced. When the mill mills them they're 'true'. But they're also rough. So then they get planed which takes a bit of wood away from all four lengthwise sides. The keep their name though. This is a convention and a quite confusing one if you're not familiar with the process.