2 ms·
I have all of those things except the drain pipe and a highway sign. Every socket set i have contains both SAE and metric. Half of my power tools are in metric
by DannyBee 14y ago
I have all of those things except the drain pipe and a highway sign.
Every socket set i have contains both SAE and metric.
Half of my power tools are in metric (festool).
All plywood that you buy from the hardware store in the US is really metric sized nowadays.
Every screw/fastener on every tool I own is metric or metric sized.
I haven't used my SAE hex keys in eons.
- jacquesm 14y agoWhen you say 'metric sized' do you mean 1250x2500 or do you mean 1219.20 x 2438.4? Home Depot does not agree with you. From http://www.homedepot.com/h_d1/N-5yc1vZbu0m/h_d2/Navigation?catalogId=10053&langId=-1&storeId=10051 http://www.homedepot.com/h_d1/N-5yc1vZbu0m/h_d2/Navigation?c... this is my absolute favorite: "5.2 mm x 2 ft. x 4 ft. Sanded project panel", all the rest is in Imperial.
- DannyBee 14y agoI mean that nominal 1/2" plywood is not 1/2" anymore, it's undersized to 12mm. The width/length is not in metric, the actual thickness is, though they come up with an imperial equivalent that is within a few thousandths. In other words, they tell folks 1/4 plywood is 15/64, 1/2" plywood is 15/32, etc. In reality, they are undersized to the nearest mm.
- lutorm 14y agoLike jaquesm says, I just bought plywood at home depot and it came in 6.45mm thickness, 24"x48". I don't know how you get 6.45mm either in metric or imperial, but it's clearly not "sized in metric".
- DannyBee 14y agoThickness wise, they are sized in metric. If you got 6.45mm, someone messed up :) No non-hardwood plywood, even 1/4" plywood, is oversized, and 6.45mm would be oversized at .2539 inches. If it was actual 1/4" (hardwood plywood), it would be 6.4mm per APA (american plywood association) standards. Outside of hardwood plywood, thicknesses are really done in metric. 1/4" nominal plywood nowadays is sized at "15/64" imperial, or in reality, 6mm. 1/2" nominal plywood is 12mm, or "15/32". (the actual sizes are metric, but are close enough in tolerance to imperial /32 or /64 sizes that they work) The only plywood you will find that is "actual" size in imperial is domestically produced hardwood plywood. This is not a large percentage of produced plywood :)
- fr0sty 14y ago>The only plywood you will find that is "actual" size... Actual thickness you mean... All construction sheet goods available in the US come in 4x8 sheets (drywall excepted, which I believe can be as long as 12'). Just because you can express "4ft by 8ft" as "Xmm by Ymm" (and that very well may be the official spec) doesn't make it 'metric' lumber in any meaninful way.
- DannyBee 14y agoActually, not all construction sheet goods come in 4x8 sheets, you have things like cement boards, which are 3x5 sheets. Same with some fiber based sheathings, some fire-code panels, etc. There are actually plenty of non-4x8 construction sheet goods. In any case, let me make this very simple: All non-domestically produced (and most domestically produced) sheet goods are produced to metric sizes that are close to 4ft x 8ft x whatever thickness. They are whole number integer metric sizes. They are metric sheet goods. They are produced and measured metrically by every producer and exporter. They get sold as imperial sizes in the US. However, the fact that they are close to some imperial size does not make them imperial sized lumber in any meaningful way. If i take a bunch of things that were produced as squares, sell them as circles, and people keep calling them circles, that doesn't make them circles. You can call a 4ft x 8ft x 1/2" piece of sheathing 4ft x 8ft x 1/2" if you like. But it's neither 4ft, nor 8ft, nor 1/2". If you don't believe that sheet goods produced and measured metrically to whole number metric sizes are metric sized simply because someone in the US decides to call it something different, we'll have to simply agree to disagree as to whether they are metric. I'm happy to agree that folks in the US don't work with the metric system intentionally, but they are working with it, whether they know it or not. This whole discussion started because one of the premises given was that things like construction sheet goods (and lumber, but let's stay simple) would have to change for folks to be able to use the metric system in the US. As i've shown, this is simply false, they just need to pretending they are imperial sizes, because the construction sheet goods are already done to metric sizes.
- TylerE 14y ago0.003" could easily be thermal expansion or humidity.