3 ms·
This bags or bins or whatever your preferred organization method is. Don't just have "cables" group them. This is how I discovered "yeah, I don't need all these
by joshstrange 2mo ago
This bags or bins or whatever your preferred organization method is. Don't just have "cables" group them. This is how I discovered "yeah, I don't need all these DVI/VGA cables and I can do with only 10 extra HDMI cables".
I'll second "grouping" with "capability sorting". Get a cable tester and sort your cables by Charge/USB speeds. Even with my default "grouping" of things like "USB-C -> C", "USB-A -> C", etc I still was buying new cables for projects/uses since I wanted to make sure I got exactly the speed/power requirements right. Now all my cables are sorted by capability and that led to more purging and less purchasing since I can go to my cable bins and grab exactly what I need.
- booty 2mo agoGod, yeah. I try to label the USB-C cables directly by capability with my label maker, if they are more than basic charging cables.
- theturtle 2mo agoI use a white paint pen. DATA and NO DATA.
- SAI_Peregrinus 2mo agoI use wire cutters. Non-compliant cables get cut & discarded. I've got a dedicated USB condom with USB-PD support for cases where I want to block data, since those are always charging and I want the negotiation to work for fast charging.
- dataflow 2mo agoWhat marker do you use to mark them? Is the ink durable and easy to read?
- aaronax 2mo agoA label maker, as they said they use, prints durable and easy to read labels.
- dataflow 2mo agoWhoops, thank, I can't read - I misread label maker as label marker!
- mceachen 2mo agoI bought a cheap pack of 5 colors of 3m electrical tape. Each cable gets one or two pieces of tape: Data: White if usb2 Blue if it supports USB 3 data (because 5Gbps USB 3 ports are mostly blue) Green if TB/USB4/40Gbps Power: None if low/no Power Delivery Yellow for 45W PD Red for 65W+ PD
- dataflow 2mo agoLove this, that sounds awesome. Thanks for sharing!
- user_of_the_wek 2mo agoYou could even do combinations of colors like on resistors.
- Evidlo 2mo agoMight get sticky residue after a few years
- dns_snek 2mo agoI suggest finding something else, electrical tape starts coming off after a few years, leaving behind sticky residue that's impossible to remove without some kind of solvent. Same goes for masking tape.
- notpushkin 2mo agoHeatshrink?
- dns_snek 2mo agoHeatshrink is great if you're making cables but you would need a really high shrinkage ratio to fit over the connector and then shrink enough, the common cheap stuff is usually 2:1, maybe 3:1. You could cut the heatshrink tube, wrap it around the cable and then secure it with transparent tape. It would slide around but at least it wouldn't leave residue on the cable. Maybe clip-on cable markers like this? [1] Easy to 3D print if you're so inclined. [1] https://uk.farnell.com/multicomp-pro/pb-250-sm0c/cable-marker-0-15-0-5mm-0-9-pk250/dp/1891367 https://uk.farnell.com/multicomp-pro/pb-250-sm0c/cable-marke...
- zxexz 2mo agoSomewhat recently, on a wild night out on the town, I ended up buying a USB-C <> USB-C cable tester[0]. Using it, I managed to find a few amazing cables amongst my collection. Gave away the others with context. I want something like this for every type of cable. [0] https://caberqu.com/20-42-c2c-caberqu.html https://caberqu.com/20-42-c2c-caberqu.html
- unwind 2mo agoI like your idea of a wild night out! Note to others: that tester board looks fairly passive, i.e. I don't see (mention of) a microcontroller to talk to the chip that high-powered cables must have. So I guess it's somewhat limited in the number of things it can check?
- gunalx 2mo agoMore often than not just knowing the contact has OK connection is good enough. As far as I know the marker chips is mostly to tell the devices to not abuse the cable.
- alias_neo 2mo agoI have a cheaper version, it does basically all one needs by telling you how many conductors the cable has, if it's only got 4 lights lit up it's a simple USB2, more power LEDs is a higher power charging cable, more data pairs, higher data throughput/USB3, nearly all of the lights (usually bar 1 of the CCX) it's full DP/Thunderbot, data, charging, A/V etc. Sometimes it even shows USB-C connectors that are only wired for one orientation!
- zimpenfish 2mo agoThe Treedix[0] can query e-marker chips. [0] https://treedix.com/products/treedix-usb-cable-tester-usb-c-cable-tester-usb-tester-for-data-transmission-and-power-transmission-cable-testing-resistor-testing-type-c-emarker-for-usb-a-micro-b-micro-b-3-0-type-c-lighting-mini-b https://treedix.com/products/treedix-usb-cable-tester-usb-c-...
- zxexz 2mo agoHuh, looking at the photos, they really don’t do the board justice. It’s a gorgeous thing to look at and one of the only “bare pcb” tools I’ve used that still functions after years of being thrown in a backpack. It is Fully passive I think (the newer BLE one does emarker queries etc.). But it does the job very well. I haven’t had it fail to identify the capabilities of any cable yet.
- zimpenfish 2mo agoI went for a colour label system - one colour for type of cable (C-C, A-C, etc.) and one colour for capabilities (power, usb2, usb3, usb4+, etc.) Makes it super easy to find, say, a data microUSB (blue, orange) for the Audiomoth) or a simple charging microUSB (red, orange) for the old blood pressure cuff).
- DragonStrength 2mo agoThe HDMI cables are a lie anyway with how many versions I've owned. I'm sick of squinting at the writing on the wires. Just buy new ones.