3 ms·
They evaporate the water which is what makes it cool so effeciently.
by SirMaster 1mo ago
They evaporate the water which is what makes it cool so effeciently.
- Ductapemaster 1mo agoEvaporative cooling does not necessitate an open loop system
- Eisenstein 1mo agoThe system which runs coolant over the chips can be closed but the part which uses an evaporative system to cool that is still open loop and vents water into the air, no?
- Ductapemaster 1mo agoNope, it doesn't have to be open loop! Example of such a system being used specifically for datacenters: https://blog.vantage-dc.com/2026/04/22/cooling-without-the-drain-how-closed-loop-systems-cut-day-to-day-water-use/ https://blog.vantage-dc.com/2026/04/22/cooling-without-the-d... Evaporated water is condensed, and in the process transfers its heat into another place that removes it. Another simple example is a pot of boiling water with a lid on it.
- Eisenstein 1mo agoThe link you cited is not evaporative cooling and a pot of boiling water with a sealed lid on it is a pressure vessel which eventually explodes.
- Ductapemaster 1mo agoIf you were to remove the heat at a sufficient rate by, say, turning the lid into a heat exchanger, you would have a stable system.
- Eisenstein 1mo agoHow is that different from not using evaporative cooling and just putting the heat exchanger on the burner?
- Ductapemaster 1mo agoWater is being used to get heat from one place to another. The idea is being able to separate the heat generation and the heat extraction
- Eisenstein 1mo agoYou are adding an extra step though. Use a closed loop coolant and remove the heat from that coolant with the heat exchanger. Why would evaporation in between be more efficient?
- gorbypark 1mo agoThat's the problem, removing heat at a sufficient rate. Of course it can be done, but the most efficient way (in terms of cost) is just open loop evaporation. I'm not a datacenter engineer, but I used to work in the ski industry. Snowmaking systems use vast quantities of compressed air. It works better if that air is cool. Blowing hot compressed air out of a snow cannon means the air temperature (wet bulb to be specific) needs to be colder to make snow. Anyways, most air compression stations use water to cool the air, and then evaporative coolers to cool the water. The water is reused, but a ton (not sure of the percentage) is lost into the air. It's more or less a tower with a big fan on top, and water percolates down from the top, being cooled by the air as it goes. The water is then collected and pumped through the system again (but of course has to be always topped up to counteract what was lost to evaporation). Anyways, long story short is it's most cost effective to just spray water into the air to cool water, as long as water is free/cheap.
- minimaltom 1mo agoOh like one of those scenic cone towers like on a nuclear power plant? Iiuc youre saying: its more cost-efficient to waste water using evaporative cooling so thats what we'll get, not that a closed loop with a heat exchanger is technically infeasible?
- SirMaster 1mo agoI didn't say evaporative HAS to be open loop, but many are, which answers the question why they use up a bunch of water.