3 ms·

It's because both radians and degrees are are a ratio of a length to another length and are thus dimensionless. No matter how you measure it, all angles are wit

It's because both radians and degrees are are a ratio of a length to another length and are thus dimensionless. No matter how you measure it, all angles are without a unit. It's most obvious with radians but it's also the case with degrees. Using radians, you are guaranteed to not introduce unusual extra terms to rescale angles, if you use any other scale of angle you will have to keep track of extra terms. That may be useful in whatever you're doing. I work in degrees quite often and I'm careful to keep track of the 2pi/360 terms that crop up all over the place. With grade measure you have to keep track of 2pi/400 terms and with turns you have to keep track of 2pi/1 terms that will repeatedly show up. Again, depending on what you're doing, this may or may not make sense to do. In general, mathematics works out easier when the scaling term is 2pi/2pi because then you have a lovely 1 scale factor you don't have to keep track of.

eru 2mo ago
Agreed. Though sometimes it's useful to keep track of 'fake' units like for angles, to make something like dimensional analysis work for you. But that's more for analysis of your code / formulas than when you actually go and compute things.
dahart 2mo ago
> all angles are without a unit. Dimensionless, sure, but what do you mean here? Radians and degrees are units, are they not?
- thyristan 2mo ago
  In a very awkward way: rad is m/m, which is 1...
  - ant6n 2mo ago
    Perhaps in the physics sense, but in computer science we do have the notion of types which does allow us to model the difference between an angle and other numerics.
  - aidenn0 2mo ago
    It is only equal to 1 by convention. If we instead considered the ratio of the diameter to the arc-length then rad would be 1/2.
  - simiones 2mo ago
    Dimensions and units are separate things, though. For example, 1 minute and 1 second are different units of the same time dimension. Similarly, 1 rad and 1 degree are both dimensionless, but they are both different units.
    - thyristan 2mo ago
      Theoretically, you can define systems of measurement where a lot of seemingly separate things fall on the same units and dimensions. There are "natural units" in physics where you take the fundamental nature of particles and relativity into account and make some convenient choices for some physical constants such as the speed of light c := 1. Then the speed becomes dimensionless, length and time have the same unit and dimension (a length of 1eV is a time period of 1eV), and almost all units are simply derived from a measurement of energy (electron volt, not as basic as people would like, but useful enough). https://en.wikipedia.org/wiki/Natural_units https://en.wikipedia.org/wiki/Natural_units
      - dahart 1mo ago
        > Then the speed becomes dimensionless, length and time have the same unit and dimension Uh, that is not what the article you linked is saying. Natural units don’t make speed dimensionless, nor allow you to use the same unit for length and time. Natural units remove the conversion constants, not the units or dimensions.
  - deleted 2mo ago
    [deleted]
  - dahart 2mo ago
    That’s the awkward argument for being dimensionless. But we know we have units of angle because we have scale factors to convert between them.
srean 2mo ago
It is dimensionless by fiat and convention. It clearly has units such as degrees, grad and radians. Just like other quantities that have units, a specific measurement is expressed as a pure numerical multiple of an unit which may be radians, degrees etc. This is a known wrinkle in dimensional analysis and people have considered making angles a fundamental quantity such as mass, length and time but have not done so because of the disruption it would cause. More details here https://en.wikipedia.org/wiki/Radian#Dimensional_analysis https://en.wikipedia.org/wiki/Radian#Dimensional_analysis https://en.wikipedia.org/wiki/Angle#Dimensional_analysis https://en.wikipedia.org/wiki/Angle#Dimensional_analysis
- lioeters 2mo ago
  That's my rabbit hole of the week. > The current state of affairs leads inevitably to ghostly appearances and disappearances of the radian in the dimensional analysis of physical equations. In "A spectral unit", Nature Physics (2020) - https://www.nature.com/articles/s41567-020-0997-3.pdf https://www.nature.com/articles/s41567-020-0997-3.pdf Giacomo Prando summarizes the troubled history of the radian, a unit with the odd property of appearing and disappearing seemingly at will in dimensional formulas It led me to reading about "dimensionless quantity". > There have been periodic proposals to "patch" the SI system to reduce confusion regarding physical dimensions. For example, a 2017 op-ed in Nature argued for formalizing the radian as a physical unit. SI units need reform to avoid confusion (2017) - https://doi.org/10.1038%2F548135b https://doi.org/10.1038%2F548135b > The idea was rebutted on the grounds that such a change would raise inconsistencies for both established dimensionless groups, like the Strouhal number, and for mathematically distinct entities that happen to have the same units, like torque (a vector product) versus energy (a scalar product). Don't tamper with SI-unit consistency (2017) - https://doi.org/10.1038%2F549160d https://doi.org/10.1038%2F549160d --- What's surprising is that these discussions are so recent, considering the wide implications on so much practical work in mechanics and engineering. Maybe people got so used to working around the question, that any proposed solution would be too disruptive - so it's better to keep things backward compatible rather than conceptually simple/clear and explicit. In another comment someone said, "types" (in programming and type theory, I'd guess) are a poor model of physics units. But I wonder about that, it seems "units" are something like types with associated quantities, like degrees with 360, or meters with the speed of light. This line of inquiry also led me to "dimensionless physical constants". https://en.wikipedia.org/wiki/Dimensionless_physical_constant https://en.wikipedia.org/wiki/Dimensionless_physical_constan... Certainly pi (and e) must be one of those fundamental constants regardless of any unit of measurement. A "turn", on the other hand - well, if we consider 1 as a dimensionless constant that means a "whole".. How Many Fundamental Constants Are There? (2011) John Baez https://math.ucr.edu/home/baez/constants.html https://math.ucr.edu/home/baez/constants.html
srean 2mo ago
You might find the following interesting. It is about trigonometry as practiced by early Indian mathematicians. Rather than using an unit circle they used a circle of 3438 units. https://news.ycombinator.com/item?id=45129081 https://news.ycombinator.com/item?id=45129081 Now it is customary to standardized on the radius. Early Indian astronomers and mathematicians standardize on the arc length of a minute.

eru 2mo ago

Agreed. Though sometimes it's useful to keep track of 'fake' units like for angles, to make something like dimensional analysis work for you. But that's more for analysis of your code / formulas than when you actually go and compute things.

dahart 2mo ago

> all angles are without a unit. Dimensionless, sure, but what do you mean here? Radians and degrees are units, are they not?

thyristan 2mo ago
In a very awkward way: rad is m/m, which is 1...
- ant6n 2mo ago
  Perhaps in the physics sense, but in computer science we do have the notion of types which does allow us to model the difference between an angle and other numerics.
- aidenn0 2mo ago
  It is only equal to 1 by convention. If we instead considered the ratio of the diameter to the arc-length then rad would be 1/2.
- simiones 2mo ago
  Dimensions and units are separate things, though. For example, 1 minute and 1 second are different units of the same time dimension. Similarly, 1 rad and 1 degree are both dimensionless, but they are both different units.
  - thyristan 2mo ago
    Theoretically, you can define systems of measurement where a lot of seemingly separate things fall on the same units and dimensions. There are "natural units" in physics where you take the fundamental nature of particles and relativity into account and make some convenient choices for some physical constants such as the speed of light c := 1. Then the speed becomes dimensionless, length and time have the same unit and dimension (a length of 1eV is a time period of 1eV), and almost all units are simply derived from a measurement of energy (electron volt, not as basic as people would like, but useful enough). https://en.wikipedia.org/wiki/Natural_units https://en.wikipedia.org/wiki/Natural_units
    - dahart 1mo ago
      > Then the speed becomes dimensionless, length and time have the same unit and dimension Uh, that is not what the article you linked is saying. Natural units don’t make speed dimensionless, nor allow you to use the same unit for length and time. Natural units remove the conversion constants, not the units or dimensions.
- deleted 2mo ago
  [deleted]
- dahart 2mo ago
  That’s the awkward argument for being dimensionless. But we know we have units of angle because we have scale factors to convert between them.

srean 2mo ago

It is dimensionless by fiat and convention. It clearly has units such as degrees, grad and radians. Just like other quantities that have units, a specific measurement is expressed as a pure numerical multiple of an unit which may be radians, degrees etc. This is a known wrinkle in dimensional analysis and people have considered making angles a fundamental quantity such as mass, length and time but have not done so because of the disruption it would cause. More details here https://en.wikipedia.org/wiki/Radian#Dimensional_analysis https://en.wikipedia.org/wiki/Radian#Dimensional_analysis https://en.wikipedia.org/wiki/Angle#Dimensional_analysis https://en.wikipedia.org/wiki/Angle#Dimensional_analysis

lioeters 2mo ago
That's my rabbit hole of the week. > The current state of affairs leads inevitably to ghostly appearances and disappearances of the radian in the dimensional analysis of physical equations. In "A spectral unit", Nature Physics (2020) - https://www.nature.com/articles/s41567-020-0997-3.pdf https://www.nature.com/articles/s41567-020-0997-3.pdf Giacomo Prando summarizes the troubled history of the radian, a unit with the odd property of appearing and disappearing seemingly at will in dimensional formulas It led me to reading about "dimensionless quantity". > There have been periodic proposals to "patch" the SI system to reduce confusion regarding physical dimensions. For example, a 2017 op-ed in Nature argued for formalizing the radian as a physical unit. SI units need reform to avoid confusion (2017) - https://doi.org/10.1038%2F548135b https://doi.org/10.1038%2F548135b > The idea was rebutted on the grounds that such a change would raise inconsistencies for both established dimensionless groups, like the Strouhal number, and for mathematically distinct entities that happen to have the same units, like torque (a vector product) versus energy (a scalar product). Don't tamper with SI-unit consistency (2017) - https://doi.org/10.1038%2F549160d https://doi.org/10.1038%2F549160d --- What's surprising is that these discussions are so recent, considering the wide implications on so much practical work in mechanics and engineering. Maybe people got so used to working around the question, that any proposed solution would be too disruptive - so it's better to keep things backward compatible rather than conceptually simple/clear and explicit. In another comment someone said, "types" (in programming and type theory, I'd guess) are a poor model of physics units. But I wonder about that, it seems "units" are something like types with associated quantities, like degrees with 360, or meters with the speed of light. This line of inquiry also led me to "dimensionless physical constants". https://en.wikipedia.org/wiki/Dimensionless_physical_constant https://en.wikipedia.org/wiki/Dimensionless_physical_constan... Certainly pi (and e) must be one of those fundamental constants regardless of any unit of measurement. A "turn", on the other hand - well, if we consider 1 as a dimensionless constant that means a "whole".. How Many Fundamental Constants Are There? (2011) John Baez https://math.ucr.edu/home/baez/constants.html https://math.ucr.edu/home/baez/constants.html

srean 2mo ago

You might find the following interesting. It is about trigonometry as practiced by early Indian mathematicians. Rather than using an unit circle they used a circle of 3438 units. https://news.ycombinator.com/item?id=45129081 https://news.ycombinator.com/item?id=45129081 Now it is customary to standardized on the radius. Early Indian astronomers and mathematicians standardize on the arc length of a minute.