3 ms·
Did the capacitors destroy the supply? I managed to repair mine: http://blog.jgc.org/2011/11/back-from-dead-with-power-supply-repair.html http://blog.jgc.org/20
by jgrahamc 14y ago
Did the capacitors destroy the supply? I managed to repair mine: http://blog.jgc.org/2011/11/back-from-dead-with-power-supply-repair.html http://blog.jgc.org/2011/11/back-from-dead-with-power-supply...
- jacquesm 14y agoYup, it's dead as can be :( But no problem, I'll find another one somewhere. This was a 'master 128K' version, my original became an embedded computer in an arts project at some point.
- jrabone 14y agoIf anyone is tempted to try this without purchasing a suitable kit, make sure the parts are suitably rated. The 250V non-polarised C2 may be safety critical if it's a line to line or line to neutral capacitor - look for an "X" or "Y" marking (I can't tell from the damage evident in John's photos). Lots of information on line-rated caps at http://my.execpc.com/~endlr/line-filter.html http://my.execpc.com/~endlr/line-filter.html.
- meaty 14y agoDepends if they blew the traces off the board (that happen to my Master Turbo). Soldered on paperclip fixed it but was probably a small fire waiting to happen.