3 ms·
If you document this somewhere I'd love to read about it! I took the approach of sniffing the packets between the radio and mcu on the bridge board, got most of
by elmoret 2mo ago
If you document this somewhere I'd love to read about it! I took the approach of sniffing the packets between the radio and mcu on the bridge board, got most of the way into reverse engineering that, then helped build this instead:
https://github.com/tronikos/esphome-magnetometer-water-gas-meter https://github.com/tronikos/esphome-magnetometer-water-gas-m...
But I always wanted to finish pulling flume data to home assistant, without the cloud.
- Ductapemaster 2mo agoI am planning a write up once I get it working. I'd be happy to share. My setup is a logic analyzer tap on the SPI bus between 8266 and the RFM69 on the bridge device to log raw traffic, and my secondary RX (ESP32 + RFM69) for over-the-air traffic. Also, I have a gas meter sensor based on your work half-built on my workbench. I plan to set that up once I finish my Flume distraction. Great work, thank you!
- elmoret 2mo ago> My setup is a logic analyzer tap on the SPI bus between 8266 and the RFM69 on the bridge device I'd done exactly the same, though my efforts were pre-Claude. If you want my logs/data, username at gmail.