4 ms·
I would love to have my house run on DC. Almost everything I own either switches to DC internally, or doesn't care. If it were practical to run the grid on DC
by CapitalistCartr 14y ago
I would love to have my house run on DC. Almost everything I own either switches to DC internally, or doesn't care. If it were practical to run the grid on DC, or we all go to solar for residential and light commercial, maybe I'll get my wish.
- stcredzero 14y agoJust do it! http://en.wikipedia.org/wiki/Nickel%E2%80%93iron_battery http://en.wikipedia.org/wiki/Nickel%E2%80%93iron_battery
- Wingman4l7 14y agoInteresting -- I'd never heard of this battery tech -- but I thought most personal off-grid battery banks were lead acid. Google "lead acid vs nickel iron" and you'll get some discussions on solar power / off-grid forums. I skimmed these, and it seems like any advantage nickel iron has doesn't justify their greater cost.
- grecy 14y agoTons of people up here have elaborate solar setups, usually 24V or 48V DC. Then they have an expensive 4kW inverter to 110V AC, and the vast majority of their appliances just convert back to 12V DC. A big plan for my off-grid setup is straight DC.
- meaty 14y agoA big chunk of your energy will disappear in heat via resistance unless you run silver wire everywhere or keep the runs short. DC cabling has some weird voltage divider and load characteristics as well causing drop outs. This is particularly visible with high current, low voltage loads. 48v dc is pretty dangerous as well.
- gvb 14y agoThe stuff in your house that "switches to DC internally" isn't switching to 100,000 to 800,000 volts[1], which is what the HVDC is that the article is talking about. Running DC in your house isn't going to eliminate any voltage conversions that are already going on, they will just be DC-DC converters with 48vDC (or whatever) input rather that 120vAC input. Most of the stuff in your house isn't even running on the same voltages internally... most of the electronics nowadays use many voltage "rails": * 17-19v laptop chargers (the voltage has to be higher than the battery's voltage in order to charge the battery) * 12v for older hard drives * 5v for not quite so older hard drives and older logic * 3.3v for newer logic and newer hard drives * A veritable plethora of sub-3.3v rails for CPU chips and other high tech chips. * 120vDC for "universal" motors unless you replace all your appliance motors with 48vDC (or whatever) motors In addition, the current requirements of running at a non-lethal DC voltage inside your house would require much larger wire gauges than your current wiring in order to keep the resistive losses reasonable[2]. The rewiring costs would be staggering. [1] http://en.wikipedia.org/wiki/High-voltage_direct_current http://en.wikipedia.org/wiki/High-voltage_direct_current [2] Charts for 12v wiring, 48vDC would be 4x better, but still not good - http://www.westmarine.com/webapp/wcs/stores/servlet/WestAdvisorView?langId=-1&storeId=11151&catalogId=10001&page=Marine-Wire http://www.westmarine.com/webapp/wcs/stores/servlet/WestAdvi...
- CapitalistCartr 14y ago"The stuff in your house that "switches to DC internally" isn't switching to 100,000 to 800,000 volts[1], which is what the HVDC is that the article is talking about. Running DC in your house isn't going to eliminate any voltage conversions that are already going on, they will just be DC-DC converters with 48vDC (or whatever) input rather that 120vAC input." Being an electrician, I'm aware of that. The reason I don't have a DC house is because the grid couldn't transmit DC long distance, back when the War of the Currents was fought. Now, maybe I'll get my D/C house soon.