3 ms·
WLED is a system that runs on the ESP32 for some cool capabilities to drive the ws2812s, OP linked above.
by gedy 4mo ago
WLED is a system that runs on the ESP32 for some cool capabilities to drive the ws2812s, OP linked above.
- wolvoleo 4mo agoYes but these don't need controller hardware. The OP is using a dedicated controller and I was asking why.
- leptons 4mo agoWS2812 absolutely need a controller, without one they would simply not light up.
- wolvoleo 4mo agoI mean a power controller. This is part of every WS2812 itself but with regular LEDs (be it RGB or not) you need power drivers for it, which I call the 'controller' too. You need to drive them at a certain amperage, then PWM them to get the right brightness. But with WS2812 you don't need to mess with power driver circuitry the OP mentioned. You just chain them to a microcontroller pin. It was probably my use of the word 'controller' that is a bit confusing.
- leptons 4mo agoThe comment you replied to above references WLED running on an ESP32, which has nothing to do with power. A "power controller" is not a widely used term in the world of addressable LEDs. A "power supply" is a far more common term, and has little to practically nothing to do with "controlling" the LEDs.
- poyu 4mo agoProbably the scale and usability of things. It's different if you're controlling 100 LEDs vs 5,000.
- wolvoleo 4mo agoYeah exactly that's what I was wondering about. I use a few hundred at most and in those cases I just feed power at several points in the chain to reduce resistive losses in the wiring. But yeah I'm kinda interested what kind of huge installations would need that and how they work.
- gedy 4mo agoMaybe not following, but I buy strips of WS2812 and if I wanted to for them to turn on and, say, display a rainbow, I need something to drive that. Not USB from another device, e.g. standalone.
- wolvoleo 4mo agoYes but as far as I understand the OP is not doing that, they are just using raw LEDs with power drivers and the whole shebang that is so nicely built into the ws2812s for us. Otherwise they wouldn't need these components they're talking about. I just connect them to a microcontroller pin and be done with it. I power them separately off a power bank (my LEDs are almost always worn, if they are static I just use an off-the-shelf 5V supply).