2 ms·
It's an easy test though and it can be an SMD component and some PUR-coated magnet wire or 30 awg single stranded kynar hookup wire. Use a small amount of glu
by sebcat 5mo ago
It's an easy test though and it can be an SMD component and some PUR-coated magnet wire or 30 awg single stranded kynar hookup wire.
Use a small amount of glue from a hot glue gun to fixate it when done, or epoxy if that's your thing. Avoid cyanoacrylate. Not always needed but I imagine a drone moves around alot.
Bodge wiring is a good skill to acquire - PCBs will not always be perfect. Maybe practice on something else first?
- dragontamer 5mo agoTrue. I have a bunch of through-hole parts for these sorts of situations. There are plenty of small through-hole ceramics that have leads if you really want to go there. https://www.digikey.com/en/products/detail/vishay-beyschlag-draloric-bc-components/K104K15X7RF5TL2/286538 https://www.digikey.com/en/products/detail/vishay-beyschlag-... Like this or something similar.
- jacquesm 5mo agoI've seen piggy backed decoupling caps straddling chips on some pretty fancy hardware. This lesson is re-learned quite frequently ;)