3 ms·
It's not that simple. I've found in my rig, minimum noise is achieved with the guitar volume at 7 or so and preamp gain at minimum. If I turn up the volume on
by klodolph 14y ago
It's not that simple. I've found in my rig, minimum noise is achieved with the guitar volume at 7 or so and preamp gain at minimum. If I turn up the volume on the guitar I can switch on the pad on the preamp, but this adds noise. I then add tons of distortion and gain in the software realm, so every dB of noise floor counts. Even clean guitar sounds are usually distorted.
The sound console is different. You want everything in the console to be trimmed to around 0 dB on the console's meters, and NOT as loud as possible without distorting. Trimming it to 0 dB gives you consistency between channels making it easier to work with the faders, and gives you however much headroom the console is designed to work with. "Loud as possible" will mean somewhere like +24 dB on some consoles, which is too hot to work with. Yes, they have that much headroom -- nominal line level is +4 dBu, around 1.2 V, and consoles have internal voltages in the 15-24V range.
The same goes for recording, you typically want things to peak at something like -18 dBFS. Making things peak "loud as you can without distorting" is the job of the mastering engineer, and it happens right before you stamp out CDs or MP3s or whatever.