3 ms·
The Nissan Leaf is designed for short trips and city driving primarily. In those conditions a significant amount of braking is done under 10 miles an hour. Als
by Peroni 14y ago
The Nissan Leaf is designed for short trips and city driving primarily. In those conditions a significant amount of braking is done under 10 miles an hour.
Also, in almost all 2 wheel drive cars, regenerative braking only applies to the wheels being driven and standard, dynamic braking is applied to the non-powered wheels.
I would sincerely be amazed if your brake pads lasted you even half the lifetime of the car and I will willingly hold my hands up and admit defeat if I'm wrong.
- Klinky 14y agoI can't comment on how long brake life is, but the Nissan Leaf is meant to be used like how most people use their existing cars, around town driving. There are plenty of 35, 40, 45, 55+ mph zones throughout most cities. People are only braking from 10 mph when going through a parking lot. I doubt a significant amount of Leaf drivers are driving through parking lots all day long. If you're suggesting that freeways turn into parking lots during rush hours, then your statement could be said for all cars not just the Nissan Leaf.
- dllthomas 14y agoIANA Automotive Engineer, but I notice that while much breaking happens below 10mph (everytime you come to a stop from any speed, you're doing some breaking under 10mph, right?) break pads are likely to get worn far more at higher speeds - kinetic energy depends on the square of the speed, right? So decelerating from 35mph to 10mph, the break pads need to absorb (for some k) k * 35^2 - k * 10^2 units of energy, while decelerating from 10mph to 0mph is k * 10^2. The difference is more than an order of magnitude, and it only gets bigger as the speed increases. This doesn't even take into account all the times we slow from 35mph to 25mph, which is about 6 times as much energy as slowing from 10mph to a stop.