7 ms·

It is always fun (in a broad sense of that word) when I make a comment on an industry I know nothing about and somehow stumble onto a thing that not only has a

It is always fun (in a broad sense of that word) when I make a comment on an industry I know nothing about and somehow stumble onto a thing that not only has a name but also research. I am sure there is a German word for that feel of discovering something that countless others have already discovered.

chris_st 10mo ago
XKCD calls it the "Lucky 10,000" [0] [0]: https://xkcd.com/1053/ https://xkcd.com/1053/
- mewpmewp2 10mo ago
  That is referring to something completely else. This is referring to some common fact that the person didn't figure out by themself. OP is referring to something they came up with themselves in a field they have no experience with, realizing it is actually a thing in a way feeling validated and clever.
  - gcr 10mo ago
    XKCD calls it "Engineering Syllogism" [0] [0]: https://xkcd.com/1570/ https://xkcd.com/1570/
taneq 10mo ago
Any time I invent a cool thing, I go and try and find it online. Usually it's already an established product, which totally validates my feeling that the thing I invented is cool and would be a good product. :D Occasionally it's (as far as I can tell) a legitimately new 'wow that's obvious' style thing and I consider prototyping it. :)
- chasing0entropy 10mo ago
  What have you prototyped recently? Anything you have released to market? I'm in the same general area by am teetering on actually launching products wouldn't mind connecting with a like minded e gineer
  - taneq 10mo ago
    One thing that I think has real potential is a portable split system aircon for workshops and garages. The all-in-one aircon units have terrible efficiency but split systems require expensive installation that can cost as much as the unit itself. This compromise gets you the best of both worlds. I built one a year or two ago out of a crusty old second hand split system, and a scrap metal frame that holds the indoor heat exchanger at about head height, and the outdoor heat exchanger back-to-back with it with a ~500mm gap. You open the roller door, position the frame with the outdoor side outside and the indoor side inside, close the roller door, and plug it in. Voila! Aircon! It was way undersized (2.5kW cooling) for my workshop but it still made a noticeable difference. Gonna build a 7kW cooling version for this summer. I think there's heaps of people with garage workshops that would benefit from something like this. You could also make one where the frame slips through a vertical gap rather than a horizontal one, so it can be set up through a sliding door, allowing renters to use one in houses where the owner refuses to install it.
biztos 10mo ago
> there is a German word Zeitgeistüberspannungsfreude

chris_st 10mo ago

XKCD calls it the "Lucky 10,000" [0] [0]: https://xkcd.com/1053/ https://xkcd.com/1053/

mewpmewp2 10mo ago
That is referring to something completely else. This is referring to some common fact that the person didn't figure out by themself. OP is referring to something they came up with themselves in a field they have no experience with, realizing it is actually a thing in a way feeling validated and clever.
- gcr 10mo ago
  XKCD calls it "Engineering Syllogism" [0] [0]: https://xkcd.com/1570/ https://xkcd.com/1570/

taneq 10mo ago

Any time I invent a cool thing, I go and try and find it online. Usually it's already an established product, which totally validates my feeling that the thing I invented is cool and would be a good product. :D Occasionally it's (as far as I can tell) a legitimately new 'wow that's obvious' style thing and I consider prototyping it. :)

chasing0entropy 10mo ago
What have you prototyped recently? Anything you have released to market? I'm in the same general area by am teetering on actually launching products wouldn't mind connecting with a like minded e gineer
- taneq 10mo ago
  One thing that I think has real potential is a portable split system aircon for workshops and garages. The all-in-one aircon units have terrible efficiency but split systems require expensive installation that can cost as much as the unit itself. This compromise gets you the best of both worlds. I built one a year or two ago out of a crusty old second hand split system, and a scrap metal frame that holds the indoor heat exchanger at about head height, and the outdoor heat exchanger back-to-back with it with a ~500mm gap. You open the roller door, position the frame with the outdoor side outside and the indoor side inside, close the roller door, and plug it in. Voila! Aircon! It was way undersized (2.5kW cooling) for my workshop but it still made a noticeable difference. Gonna build a 7kW cooling version for this summer. I think there's heaps of people with garage workshops that would benefit from something like this. You could also make one where the frame slips through a vertical gap rather than a horizontal one, so it can be set up through a sliding door, allowing renters to use one in houses where the owner refuses to install it.

biztos 10mo ago

> there is a German word Zeitgeistüberspannungsfreude