5 ms·

Oh, that's really cool, the channel seems like it has a lot of other nice videos as well! I wish there was a video that's so nice about compressors, like in Au

Oh, that's really cool, the channel seems like it has a lot of other nice videos as well! I wish there was a video that's so nice about compressors, like in Audacity you have all of these settings and most are also present in OBS and other software: * Threshold (dB) * Make-up gain (dB) * Knee width (dB) * Ratio * Lookahead (ms) * Attack (ms) * Release (ms) And I feel like visualizations can really help understanding them better, like: https://codepen.io/animalsnacks/full/VRweeb https://codepen.io/animalsnacks/full/VRweeb alongside maybe something that lets you loop an audio sample and see how different it sounds with each change. There obviously already are some videos and discussions and plenty of material out there, but I love a good visualization!

jamesbfb 1y ago
POSY is an absolute treasure. The time and effort he puts into his videos is absolutely evident.
0xdada 1y ago
I have watched 10+ hours of lessons on compressors and I still don't hear it. I understand most concepts but don't use much compression besides side-chaining and the built-in Ableton glue compression.
- derriz 1y ago
  I know what you mean - took me a while too. I understood what it does, how the parameters affect what it does and the mechanics of it, but struggled to "hear" it. I even bought a cheap $25 Behringer guitar compressor pedal to see what I was missing but it didn't help - later I realized that my guitar playing isn't repeatable enough. So this isn't the way to go. What made it click was due to an accidental mistake in my normal workflow - I recorded some DAW-less techno jam stuff using GarageBand (normally I just copy the wavs from my little Tascam). While playing back, I noticed that there's a master compressor and I started fiddling with it. With repetitive music like Techno and House, the difference between no compression and full compression suddenly becomes very apparent (although still somewhat subtle compared to other FX commonly used in music production). Also it helped that my recording had no compression on it - comprising just a raw drum machine and mono-synth.
- Aldipower 1y ago
  It is pretty normal not to hear compression on material that already is quite compressed. But you will hear compression on very dynamic vocals or a snare drum, I am pretty sure.
- Slow_Hand 1y ago
  That's normal. For engineers and mixers, compression is one of the more difficult phenomena to hear and build an intuition for. My advice for learning is to totally overdo the compression on a drum track (snare, kick, hats, etc) and play with the settings. Ideally these drums are uncompressed. Using a 4:1 ratio, lower your threshold all the way down until you're getting > 10 dB of gain reduction and then start playing with the attack time. What do you hear when the attack time is at 0 ms? What do you hear when you start to slow the attack time? 5 ms? 10 ms? 30 ms? 100 ms? Then do the same with your release time. Start with it set as fast as it will go and then start to slow it down. What do you hear happening? Once you have the attack time and release time feeling good then raise your threshold so that the compression is less heavy-handed (unless you like it). Set the threshold where the level of compression feels good to you.
- scarecrowbob 1y ago
  I work with audio professionally and it took me a years to get a feel for dynamics processing. Like, it wasn't until I down sat with a nice compressor (in my case a Neve 453) and just did a lot of experiments, and then took my experiences from those experiments to my live gigs. IME, you can get a feel for what the threshold and ratio are doing pretty quickly, and that's probably enough to be useful. In broad strokes that's all you need to make them "work". If you have the attack set way fast, you'll start to hear the signal get a bit muddy. But attack and release (especially on a lot of plugins) are a bit funky, and I still can't tell what the knee is doing unless I move the knob around. And I own a couple clones (76kt or gold comp 2a) and a couple of distressors, and they sound different but I still need play around with them to coax them into what I think they should sound like.
Aldipower 1y ago
The House of Kush made me compression rethink. He's the Bob Ross of audio. :-D https://www.youtube.com/watch?v=K0XGXz6SHco https://www.youtube.com/watch?v=K0XGXz6SHco

jamesbfb 1y ago

POSY is an absolute treasure. The time and effort he puts into his videos is absolutely evident.

0xdada 1y ago

I have watched 10+ hours of lessons on compressors and I still don't hear it. I understand most concepts but don't use much compression besides side-chaining and the built-in Ableton glue compression.

derriz 1y ago
I know what you mean - took me a while too. I understood what it does, how the parameters affect what it does and the mechanics of it, but struggled to "hear" it. I even bought a cheap $25 Behringer guitar compressor pedal to see what I was missing but it didn't help - later I realized that my guitar playing isn't repeatable enough. So this isn't the way to go. What made it click was due to an accidental mistake in my normal workflow - I recorded some DAW-less techno jam stuff using GarageBand (normally I just copy the wavs from my little Tascam). While playing back, I noticed that there's a master compressor and I started fiddling with it. With repetitive music like Techno and House, the difference between no compression and full compression suddenly becomes very apparent (although still somewhat subtle compared to other FX commonly used in music production). Also it helped that my recording had no compression on it - comprising just a raw drum machine and mono-synth.
Aldipower 1y ago
It is pretty normal not to hear compression on material that already is quite compressed. But you will hear compression on very dynamic vocals or a snare drum, I am pretty sure.
Slow_Hand 1y ago
That's normal. For engineers and mixers, compression is one of the more difficult phenomena to hear and build an intuition for. My advice for learning is to totally overdo the compression on a drum track (snare, kick, hats, etc) and play with the settings. Ideally these drums are uncompressed. Using a 4:1 ratio, lower your threshold all the way down until you're getting > 10 dB of gain reduction and then start playing with the attack time. What do you hear when the attack time is at 0 ms? What do you hear when you start to slow the attack time? 5 ms? 10 ms? 30 ms? 100 ms? Then do the same with your release time. Start with it set as fast as it will go and then start to slow it down. What do you hear happening? Once you have the attack time and release time feeling good then raise your threshold so that the compression is less heavy-handed (unless you like it). Set the threshold where the level of compression feels good to you.
scarecrowbob 1y ago
I work with audio professionally and it took me a years to get a feel for dynamics processing. Like, it wasn't until I down sat with a nice compressor (in my case a Neve 453) and just did a lot of experiments, and then took my experiences from those experiments to my live gigs. IME, you can get a feel for what the threshold and ratio are doing pretty quickly, and that's probably enough to be useful. In broad strokes that's all you need to make them "work". If you have the attack set way fast, you'll start to hear the signal get a bit muddy. But attack and release (especially on a lot of plugins) are a bit funky, and I still can't tell what the knee is doing unless I move the knob around. And I own a couple clones (76kt or gold comp 2a) and a couple of distressors, and they sound different but I still need play around with them to coax them into what I think they should sound like.

Aldipower 1y ago

The House of Kush made me compression rethink. He's the Bob Ross of audio. :-D https://www.youtube.com/watch?v=K0XGXz6SHco https://www.youtube.com/watch?v=K0XGXz6SHco