3 ms·
Looks like the Solidoodle is .3mm resolution vs .1mm resolution of the R2, and at roughly 25% cost. EDIT: I originally said .3 vs .2 - but it is actually .3 vs
by samstave 14y ago
Looks like the Solidoodle is .3mm resolution vs .1mm resolution of the R2, and at roughly 25% cost.
EDIT: I originally said .3 vs .2 - but it is actually .3 vs .1 - so the R2 is much more fine. Still - $500 is a good price for this at all.
Can they both use the same filament?
- maratd 14y ago> Can they both use the same filament? If you get the heated bed option, yes.
- joshuaheard 14y agoI have seen on the Solidoodle forums that the Solidoodle has a .1 "mode" but I don't have the specifics. The Solidoodle website says, "It's possible to print hi-resolution parts at a layer height of .1mm, which gives top-notch looking prints".
- bri3d 14y agoThe "resolution" numbers you're seeing are a red herring. The quoted number is the height of a layer that the settings shipped with the printer are good for, not the precision or accuracy of the print head. The X, Y, and Z resolution, as well as the extruder step size on a Solidoodle (and almost any other printer these days) is plenty good to print .1mm layers. The challenge in printing .1mm layers is that you're depositing a very tiny amount of plastic onto each layer, so variation like filament quality and moisture, temperature, and speed matters a lot more. Check out RichRap trying out different "resolutions" (layer heights) on his MendelMax printer with a Wade's extruder here to learn more about how layer heights work: http://richrap.blogspot.com/2012/01/slic3r-is-nicer-part-3-how-low-can-you.html http://richrap.blogspot.com/2012/01/slic3r-is-nicer-part-3-h...