You're not thinking this through. Yes resistance goes up the warmer the cable gets, but you know neither the resistance of the cable at 20°C nor the temperatur

You're not thinking this through. Yes resistance goes up the warmer the cable gets, but you know neither the resistance of the cable at 20°C nor the temperature of the cable. Simple example, say the user is charging their phone, you detect the cable getting plugged in and measure the resistance at say 1 Ohm to make the numbers nice. Cool, now at what resistance do you determine the cable is too hot and reduce the current? Copper's temperature coefficient is about 0.4% per °C so the resistance should be 1.12 Ohm at a safe 30°C increase right? Wrong! The cable resistance you measured could already have been at 50° and you're now pushing the cable into fire hazard territory. This isn't theoretical either, people plug in different devices after another all the time (this also eliminates any sort of memorizing if you were thinking about that). So what are you just going to wait 5 minutes at safe charging current and see if the temperature goes down? That's not going to fly in a market where some devices charge 50% in like 20 minutes. And all of this is ignoring another important design goal of usb-c: dumb charge-only devices exist and should continue to function with a minimal of extra added components. USB-C allows this with the addition of two simple resistors that set the current you want. Measuring resistance on the other hand either requires a accurate voltage source on the device side (expensive) or somehow connecting the power line to some other line (how that would work without additional control electronics I have no idea).