3 ms·
"The SMSC 1V8 power has been disconnected from the system supply." I notice they don't talk about this much at all, or give credit to the person who figured th
by makomk 14y ago
"The SMSC 1V8 power has been disconnected from the system supply."
I notice they don't talk about this much at all, or give credit to the person who figured the issue out (who I believe may have been banned from the official forums for talking about it). It turns out that the high temperatures some people were seeing on the LAN9512 chip weren't actually normal at all; they'd screwed up and connected the output of its internal 1.8V regulator, which wasn't meant to drive external circuitry, to the 1.8V rail. So on some boards (depending on tolerances) its internal regulator ended up providing the 1.8V supply for the entire board and overheating quite a bit.
- X-Istence 14y agoDo you have a source for this? Also is there something that owners of older boards can do (such as cutting the trace?) to make sure their boards don't overheat?
- makomk 14y agoThere's an entire thread about it on the Element 14 forums here: http://www.element14.com/community/thread/19236 http://www.element14.com/community/thread/19236 Unfortunately, unlike some of the other modifications in newer board revisions, there's no easy fix for this for owners of older boards. The level to which boards are affected varies and it's not clear how many (if any, for that matter) have stability problems as a result. Doesn't help that most people don't actually seem to report when their board doesn't work properly, in part because the moderators on the official forums are quite hostile to anyone mentioning problems.