26 ms·

I think you're right generally, but I wanna call out the ODROID H4 models as an exception to a lot of what you said. They are mostly upgradable (SODIMM RAM, SAT

I think you're right generally, but I wanna call out the ODROID H4 models as an exception to a lot of what you said. They are mostly upgradable (SODIMM RAM, SATA ports, M.2 2280 slots), and it does support in-band ECC which kinda checks the ECC box. They've got a Mini-ITX adapter for $15 so it can fit into existing cases too. No IPMI and not very many NVME slots. So I think you're right that a good mATX board could be better.

sandreas 1y ago
Well, if you would like to go mini (with ECC and 2.5G) you could take a look at this one: https://www.aliexpress.com/item/1005006369887180.html https://www.aliexpress.com/item/1005006369887180.html Not totally upgradable, but at least pretty low cost and modern with an optional SATA + NVMe combination for Proxmox. Shovel in an enterprise SATA and a consumer 8TB WD SN850x and this should work pretty good. Even Optane is supported. IPMI could be replaced with NanoKVM or JetKVM...
- a012 1y ago
  That looks pretty slick with a standard hsf for the CPU, thanks for sharing
- smartbit 1y ago
  Nice indeed. With only 2 nvme slots, what drive configuration do you have in your mind? Backup from nvme to HDD locally and another device remote?
  - sandreas 1y ago
    For my personal purpose i would go 2 x wd sn850x 2tb RAID1 nvme(consumer) You could also go 32gb+ Intel optane Boot and enterprise SATA data, depending on your use case
geek_at 1y ago
Not sure about the odroid but I got myself the nas kit from friendly elec. With the largest ram it was about 150 bucks and comes with 2,5g ethernet and 4 NVME slots. No fan and keeps fairly cool even under load. Running it with encrypted zfs volumes and even with a 5bay 3.5 Inch HDD dock attached via USB https://wiki.friendlyelec.com/wiki/index.php/CM3588_NAS_Kit https://wiki.friendlyelec.com/wiki/index.php/CM3588_NAS_Kit
ilkhan4 1y ago
You can get a 1 -> 4 M.2 adapter for these as well which would give each one a 1x PCIe lane (same as all these other boards). If you still want spinning rust, these also have built-in power for those and SATA ports so you only need a 12-19v power supply. No idea why these aren't more popular as a basis for a NAS.

sandreas 1y ago

Well, if you would like to go mini (with ECC and 2.5G) you could take a look at this one: https://www.aliexpress.com/item/1005006369887180.html https://www.aliexpress.com/item/1005006369887180.html Not totally upgradable, but at least pretty low cost and modern with an optional SATA + NVMe combination for Proxmox. Shovel in an enterprise SATA and a consumer 8TB WD SN850x and this should work pretty good. Even Optane is supported. IPMI could be replaced with NanoKVM or JetKVM...

a012 1y ago
That looks pretty slick with a standard hsf for the CPU, thanks for sharing
smartbit 1y ago
Nice indeed. With only 2 nvme slots, what drive configuration do you have in your mind? Backup from nvme to HDD locally and another device remote?
- sandreas 1y ago
  For my personal purpose i would go 2 x wd sn850x 2tb RAID1 nvme(consumer) You could also go 32gb+ Intel optane Boot and enterprise SATA data, depending on your use case

geek_at 1y ago

Not sure about the odroid but I got myself the nas kit from friendly elec. With the largest ram it was about 150 bucks and comes with 2,5g ethernet and 4 NVME slots. No fan and keeps fairly cool even under load. Running it with encrypted zfs volumes and even with a 5bay 3.5 Inch HDD dock attached via USB https://wiki.friendlyelec.com/wiki/index.php/CM3588_NAS_Kit https://wiki.friendlyelec.com/wiki/index.php/CM3588_NAS_Kit

ilkhan4 1y ago

You can get a 1 -> 4 M.2 adapter for these as well which would give each one a 1x PCIe lane (same as all these other boards). If you still want spinning rust, these also have built-in power for those and SATA ports so you only need a 12-19v power supply. No idea why these aren't more popular as a basis for a NAS.