5 ms·
How can you tell if a bike you are buying is stolen? It would be pretty easy for a bike thief to post an ad on Craigslist saying they are selling their used bik
by enraged_camel 14y ago
How can you tell if a bike you are buying is stolen? It would be pretty easy for a bike thief to post an ad on Craigslist saying they are selling their used bike.
>>Tangentially, and pardon my ignorance, I'm not a biker: I can't understand people who shell out thousands of dollars for a bike, are these so much better than a $500 one?
It makes a huge difference. More expensive bikes are built from lighter and stronger materials (such as carbon fiber), are more aerodynamic and have better balance. Just to name a few of the benefits.
- Retric 14y agoI would argue it's often more about falling into the same trap as 'audiophiles' as it is about direct benefits. Few people notice the added weight from drinking 2lb of water but people spend hundreds of dollars shaving 1/10th of that from their bike.
- herval 14y agoIt does make a very considerable difference, if you're serious about your biking, though. Plus, more expensive bikes are not necessarily lighter - there are many variables involved on the price (wrist comfort, seating type, suspensions, frame stiffness/weight, numbers and quality of gears, etc) - many more than the usual 'audiophile' choosing range. But yeah, a lot of people buy expensive rides for the looks and have no idea what do do with them...
- cloverich 14y agoTo chime in - offroading with a mountain Bike - if I take a drop > ~5 feet or so, the tires on my (former) $500 dollar bike would Taco.So yeah, there's a diff, and its not always weight. Alas, my bike was targeted and stolen. :(
- Johngibb 14y agoIn my experience, it stops making a difference once you have to carry a 20 lb kryptonite chain to lock it. I just spent all that money on a light bike, and now it's 20 pounds heavier. I hate bike thieves. Just had my bike stolen last week in NYC
- ahelwer 14y agoIt's been said that all appropriately-paired combinations of bikes and locks weigh 50 lbs.
- grogenaut 14y agoFor me the price isn't about the weight, it's about me commuting in a city with huge hills, rain, and long flat stretches. My commute goes up and down several 300ft hills and across a long bridge (Seattle to Bellevue). So I end up riding a road bike with a large gear range and disc brakes. This isn't easy to setup, and my components cost more than the frame. When you commute every day 45 minutes each way, it also makes sense to spend some money on comfort (I mean that's 400 hours a year you are on the bike). Most people do it when they buy cars, it's the same think.
- vacri 14y agoMost 'serious cyclists' don't actually spend that kind of money on that kind of weight. Some crazy people do, but some people also spend $8k on a desktop PC. In the range of most cyclists: having carried my $400 iron-frame bike up stairs and a friend's $1500 bike up same, the difference is certainly not "1/10 of 2lb".
- nl 14y agoUnlike audiophile "benefits", weight loss to cyclists is directly quantifiable in theory[1] and measurable[2]. It's true that it is usually much cheaper to lose weight on the rider than on the bike, but for some people it is probably easier (and more fun!) to spend the money. [1] 1.5 kg makes ~8.5 second difference over 2000m on a 3% slope hill http://www.analyticcycling.com/ForcesLessWeight_Page.html http://www.analyticcycling.com/ForcesLessWeight_Page.html [2] http://www.training4cyclists.com/how-much-time-does-extra-weight-cost-on-alpe-dhuez/ http://www.training4cyclists.com/how-much-time-does-extra-we...
- Retric 14y ago[1] that's assuming your vary light, climbing the whole trip, and have a terrible power output of 250w and uses 3lb which is a fair amount and even then 8.5 seconds after a 2km climb. A more realistic 400w + 120lb rider +3% grade for 2000km then a negative 3% grade for 2000km and a weight diffidence of .3lb for 300$. End result after 4,000km is less than 5 minutes wow that's worth 300$. [2] 1 trip using human riders hardly qualify's as measurement. But even still measurement is next to meaningless you can detect cocaine on most people in an international airport that does not mean they have had anything but the most indirect contact with the stuff. PS: Sure if your racing professionally then things change around, but that's a tiny portion of the bike community.
- nl 14y agoWhen you are out riding with your friends, you typically want to beat them to the top of climb. A 2km climb is fairly reasonable for that type of climb. You are right - 200w is low - I just used the default values. If you look on Strava, most middle-of-the-pack people post power in the low 300watts. 1.5 kg is easily the difference between a < $1000 bike and a $2000 bike. Cycling (as a sport) has a lot of financially wealthy (but time poor) people (the same people who used to play golf). These people aren't interested in the cost effectiveness of an upgrade, just weather it will help them beat their friends up a hill on the Saturday ride. Personally, I think using ~$200 carbon fiber water bottle cages to save 30 grams is a waste of money. But the truth is that the grams they save do add up, and the weight does make a difference on hills. If you don't care about money (!) then why not spend the money....
- hatcravat 14y agoIt completely depends on one's typical ride. If you're climbing 10% grades all day in lycra, then 5 lbs makes an enormous difference. If, on the other hand, you're carrying a 10 lbs lock and 40 lbs of stuff in your panniers, then, yeah, the weight of the bike won't matter that much. In the latter case a heavier bike may actually be better. As much as everyone obsesses over weight, it's not the only difference between a $500 bike an a $5000. The more expensive components are also going to have more-difficult-to-quantify benefits like fit and finish (i.e., look prettier). The higher-end components also work better: shifting will be much more consistent, bearings will roll more freely, brakes won't require as much force, etc. This is analogous to a car magazine complaining about how a particular model has a "mushy gearbox." You can still drive it, but the experience isn't as nice.
- hatcravat 14y agoIt completely depends on one's typical ride. If you're climbing 10% grades all day in lycra, then 5 lbs makes an enormous difference. If, on the other hand, you're carrying a 10 lbs lock and 40 lbs of stuff in your panniers, then, yeah, the weight of the bike won't matter that much. In the latter case a heavier bike may actually be better. As much as everyone obsesses over weight, it's not the only difference between a $500 bike an a $5000. The more expensive components are also going to have more-difficult-to-quantify benefits like fit and finish (i.e., look prettier). The higher-end components also work better: shifting will be much more consistent, bearings will roll more freely, brakes won't require as much force, etc. This is analogous to a car magazine complaining about how a particular model has a "mushy gearbox." You can still drive it, but the experience isn't as nice.
- zurn 14y ago> More expensive bikes are built from lighter and stronger materials (such as carbon fiber) I would recommend anyone thinking carbon fiber makes stronger bikes to visit a topical image blog at http://www.bustedcarbon.com/ http://www.bustedcarbon.com/ :) The weight issue is addressed elsewhere in comments...
- 001sky 14y agoThat is a cool link. Carbon has tensile but not shear strength. As the evidence shows.
- 001sky 14y agoIn absolute terms, Tenstile (psi x1,000) for Ti Vs CFRP Tensile = 145 vs 215 Shear= 135 vs 1.5 <<that is why things go crack. Carbon Fiber Reinforced Polymer (CFRP) Composition: 70% carbon fibers in epoxy matrix Property Value in metric unit Value in US unit Density 1.6 10³ kg/m³ 101 lb/ft³ Tensile modulus (LW) 181 GPa 26300 ksi Tensile modulus (CW) 10.3 GPa 1500 ksi Tensile strength (LW) 1500 MPa 215000 psi Tensile strength (CW) 40 MPa 5800 psi Thermal expansion (20 ºC, LW) 0.0210-6 ºCˉ¹ 0.0110-6 in/(in ºF) Thermal expansion (20 ºC, CW) 22.510-6 ºCˉ¹ 12.510-6 in/(in* ºF) LW- Lengthwise direction, CW- Crosswise direction [1] http://www.substech.com/dokuwiki/doku.php?id=epoxy_matrix_composite_reinforced_by_70_carbon_fibers&DokuWiki=62d982a57ddac09b194d27c46bf89e90 http://www.substech.com/dokuwiki/doku.php?id=epoxy_matrix_co... [2] http://www.substech.com/dokuwiki/doku.php?id=titanium_near-alpha_alloy_ti-8al-1mo-1v http://www.substech.com/dokuwiki/doku.php?id=titanium_near-a.... These are directinally correct for raw materials; the actual alloys and engineered structures will take into account obvious characteristics of the material.
- nl 14y agoI hate, hate, hate the anti-scientific view that busted carbon promotes. Carbon fiber's failure mode is different to metal - it breaks rather than bends. In most cases crashes that destroyed carbon frames would have also destroyed metal frames - but a frame bent out of alignment doesn't look as spectacular. It is possible to build a bike from carbon fiber that fails in surprising ways (eg, clamping it in a bike carrier). That's because CF allows more flexibility in building with it, not because it is inherently weak. If you want a strong carbon frame buy a cheap one. They typically use the same number of layer of fiber all over the frame (instead of trying to minimize weight in low strain parts) and they use plain woven fiber aligned randomly. That makes the bike heavier than a high-end frame, and not as strong for expected stresses (pedalling) as it could be for the same weight but it makes it more robust in the even on unexpected strains.