5 ms·

I find woodworking fun for basically all the same reasons. Plus there's still the math of adding up things to predict cut layouts, and you end up with a new she

I find woodworking fun for basically all the same reasons. Plus there's still the math of adding up things to predict cut layouts, and you end up with a new shelf or box or table. I'm not sure I would use anything I knitted.

treszkai 1y ago
I also found woodworking recently as a software engineer and it's incredibly rewarding. Both the tactile feeling of the activity, the idea of building something that _exists_ in physical form and exists in your or a loved one's home, and the pride that you feel about a finished product and having overcome challenges and learned something. Unlike knitting, I love its usefulness. There are so only many use cases for knitwear, but furniture, man, everyone needs furniture. And being in a home that I built by my two hands is infinite joy. The three aspects where it falls short to knitting: - It can't be done mindlessly. It would be unsafe and you'd make costly mistakes that you can't undo by pulling on the yarn. - It's more expensive. The materials are a bit more pricy (compared to hours spent on working them), but the machines certainly are. - You are confined to space and time. Whether it's your garage or wood shop where you have machines and can make noise and dust, or it's your living room where you exclusively use hand tools – you surely can't do it in your car while waiting for the kids, or at the university, or on the public transport. Whittling small objects is the one exception. But yes, woodworking is awesome.
- munificent 1y ago
  Agree on all accounts. I very much enjoy the limited woodworking I've done, but the logistics are much trickier than knitting. I do find whittling to be an interesting middle point. Like knitting, you don't need a dedicated workshop. It doesn't take a lot of set up and tear down for a given session. You can fit the project and tools in a small space. Of course, you're shedding wood chips the whole time, so you can't really whittle on the couch. And you sure as hell can't do it on an airplane. But you can do it when, say, camping with friends, or sitting on the back porch when it's nice out.
bonki 1y ago
I find woodworking extremely alluring. I'd love to do woodworking, but that requires space for an environment which I don't have. I like to think that in a parallel universe I build guitars and restore old wooden furniture.
- jvanderbot 1y ago
  I have some advice! I have this problem. I did three things. First, I joined a makerspace that had a woodshop. This seems like it should cure all your problems but it won't. There's limited storage, unpredictable tool availability, the motivational issues of driving to a new place to work, etc. Second, I joined another makerspace out of town! Redundancy and the availability of friends in the area to work with helps. Plus, supporting makerspaces feels good and the cost is not much compared to other hobbies. Finally, there are some very basic, not large tools that can get you through 90% of projects, including very nice looking bookshelves, desks, cabinets, etc: * Circle saw + track guide for rip cuts * Saw horses for adhoc tables * Power drill (+ you'll want one for all kinds of useful things anyway) * Nice drill bit set * Pocket hole jig (saves you time and assembly space) * Drill block (takes the place of a drill press in a pinch) * Painting blankets to put stain / glue-ups on All of the above can fit in a small area of a closet, available when motivation strikes. Far and away the biggest storage headache is wood, which you'll have to get creative about, but for restoration or even modification, you won't need much. And for smaller projects you'll probably use most of what you buy on the same day if you plan it out. Upgrades (which a makerspace would provide anyway): * If you have a little space (like a desktop), you can get a chop/miter saw which makes repeated precise cuts much easier * A router + bit set (esp keyhole bit! This makes hanging this much easier) * Shopvac for dust (+ shopvacs are super useful anyway) That's really it. You can do almost all the projects you'd want with just those, from the living room, patio, backyard, driveway, garage, or a parking spot out front. What I get from the makerspace is access to drill presses, router tables, and table saws. Table saws are a game changer and are the best way to level up your precision and cut accuracy, but require so much space that I could never justify it at home (and small portable table saws are not the same). I'm definitely still learning, but the main lessons are that good wood ($), precise cuts, adding layers from trim / recessed boards, hiding screws, and tons of sanding will make anything look really, really nice. EDIT: One last thing: You can easily practice woodworking fundamentals without space by making joints, practicing stain matching (try to get veneer plywood to match a stained board), or practicing right-angle, precise cuts.
agumonkey 1y ago
Some light wood types have golden shades if looked at closely. It's quite beautiful. And when sanded very fine, it's silky smooth.

treszkai 1y ago

I also found woodworking recently as a software engineer and it's incredibly rewarding. Both the tactile feeling of the activity, the idea of building something that _exists_ in physical form and exists in your or a loved one's home, and the pride that you feel about a finished product and having overcome challenges and learned something. Unlike knitting, I love its usefulness. There are so only many use cases for knitwear, but furniture, man, everyone needs furniture. And being in a home that I built by my two hands is infinite joy. The three aspects where it falls short to knitting: - It can't be done mindlessly. It would be unsafe and you'd make costly mistakes that you can't undo by pulling on the yarn. - It's more expensive. The materials are a bit more pricy (compared to hours spent on working them), but the machines certainly are. - You are confined to space and time. Whether it's your garage or wood shop where you have machines and can make noise and dust, or it's your living room where you exclusively use hand tools – you surely can't do it in your car while waiting for the kids, or at the university, or on the public transport. Whittling small objects is the one exception. But yes, woodworking is awesome.

munificent 1y ago
Agree on all accounts. I very much enjoy the limited woodworking I've done, but the logistics are much trickier than knitting. I do find whittling to be an interesting middle point. Like knitting, you don't need a dedicated workshop. It doesn't take a lot of set up and tear down for a given session. You can fit the project and tools in a small space. Of course, you're shedding wood chips the whole time, so you can't really whittle on the couch. And you sure as hell can't do it on an airplane. But you can do it when, say, camping with friends, or sitting on the back porch when it's nice out.

bonki 1y ago

I find woodworking extremely alluring. I'd love to do woodworking, but that requires space for an environment which I don't have. I like to think that in a parallel universe I build guitars and restore old wooden furniture.

jvanderbot 1y ago
I have some advice! I have this problem. I did three things. First, I joined a makerspace that had a woodshop. This seems like it should cure all your problems but it won't. There's limited storage, unpredictable tool availability, the motivational issues of driving to a new place to work, etc. Second, I joined another makerspace out of town! Redundancy and the availability of friends in the area to work with helps. Plus, supporting makerspaces feels good and the cost is not much compared to other hobbies. Finally, there are some very basic, not large tools that can get you through 90% of projects, including very nice looking bookshelves, desks, cabinets, etc: * Circle saw + track guide for rip cuts * Saw horses for adhoc tables * Power drill (+ you'll want one for all kinds of useful things anyway) * Nice drill bit set * Pocket hole jig (saves you time and assembly space) * Drill block (takes the place of a drill press in a pinch) * Painting blankets to put stain / glue-ups on All of the above can fit in a small area of a closet, available when motivation strikes. Far and away the biggest storage headache is wood, which you'll have to get creative about, but for restoration or even modification, you won't need much. And for smaller projects you'll probably use most of what you buy on the same day if you plan it out. Upgrades (which a makerspace would provide anyway): * If you have a little space (like a desktop), you can get a chop/miter saw which makes repeated precise cuts much easier * A router + bit set (esp keyhole bit! This makes hanging this much easier) * Shopvac for dust (+ shopvacs are super useful anyway) That's really it. You can do almost all the projects you'd want with just those, from the living room, patio, backyard, driveway, garage, or a parking spot out front. What I get from the makerspace is access to drill presses, router tables, and table saws. Table saws are a game changer and are the best way to level up your precision and cut accuracy, but require so much space that I could never justify it at home (and small portable table saws are not the same). I'm definitely still learning, but the main lessons are that good wood ($), precise cuts, adding layers from trim / recessed boards, hiding screws, and tons of sanding will make anything look really, really nice. EDIT: One last thing: You can easily practice woodworking fundamentals without space by making joints, practicing stain matching (try to get veneer plywood to match a stained board), or practicing right-angle, precise cuts.

agumonkey 1y ago

Some light wood types have golden shades if looked at closely. It's quite beautiful. And when sanded very fine, it's silky smooth.